If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
GA-686BX and 160GB HD
Reinhard Schuepferling wrote (2003-06-14 10:07:37 PST):
Problem fixed. I'm using now an extra IDE-Controller: Promise Utra100 TX2 [1,2] (30,-EUR) - own drivers (95b-w2003) (no Win-updates necessary)* - hardware-BIOS - works like an SCSI-Adapter-Card with IDE Channels - IRQ-sharing is no problem As addition, the Controller-Performance varies with the PCI slot. When moving the card from PCI slot 2 to 3, the copying speed doubled with my hardware configuration. Boot-up with the card take's a while. After the BIOS has finished, the Ultra100 needs 6s scanning for drives. The windows-enumeration needs ~17s * at start-up. Don't know why. And there seems to be a conflict with an old isa-SCSI card (UDS-IS11) shipped with my scanner (UMAX Astra 1200S FW3.1). If the Scan-software (Vistascan 2.43) ist startet during (HD-)access to the Ultra100, the Scan freezes. Reinhard (couldn't place a reply in the original thread) http://groups.google.com/groups?th=6b05e8802a417a8c * Boot Log Analyzer 10:38:09 16.72 Enumerated Win9x-ME Promise Ultra100 TX2 (tm) IDE Controller (PCI\VEN_105A&DEV_4D68&SUBSYS_4D68105A&REV_02\BUS_ 00&DEV http://www.vision4.dial.pipex.com |
Thread Tools | |
Display Modes | |
|
|