If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Help with old HP-IIp error code 12 please...
Hope this guide can help someone!
Thanks for all your help on these groups http://www.angelfire.com/vi/pueet/HP...IIp/hplaserjet Moe Wodnicki wrote: This one isn't covered in any book, density control board is bad. Laser Service 1449 Aviation Blvd. Redondo Beach, CA 90278 www.laser-service.com "Phil Bert" wrote in message ... The status read-out says: 12 OPEN OR NO EP-L The manual describes this as: "This message appears when either the printer is not closed properly, the EP-L cartridge is missing, or the cooling fan is not working." But the printer is closed tight, securely and squarely, there is a 2 week old cartridge installed that I used last night, and the ventilation fa is running fine. Any ideas? Thanks! Bert |
Thread Tools | |
Display Modes | |
|
|