If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
When I print with ICM profiles, I get stripes
Hello all,
I've had this problem since I started trying to use custom-generated ICM profiles. I have an Epson R1800 printer which works fine in usual modes. I have a Datacolor SpyderPrint calibrator and I've generated profiles for a bunch of papers. Now when I print (in Paint Shop Pro) I do the following in the driver settings: - Glossy / Satin / whatever is closest to the paper type - Photo RPM - ICM -- Driver ICM (Basic) -- input profile sRGB -- Intent perceptual -- Printer profile: whatever my generated profile is. And I get stripes / banding, very visible in the light areas of the images, fine in the darker areas. In particular I get a much darker band in the first 5mm of the print. I've searched the web several times without success and regenerated the profiles a bunch of times. If I disable ICM and use 'Color Control', it prints fine (but then of course the colors are a bit off). Any idea ?!? I won't accept "turn ICM off and use photoshop's native profile handling" as an answer because (1) I don't have photoshop and (2) I would like an app- independent solution. Thanks -- Guillaume Dargaud http://www.gdargaud.net/ |
#2
|
|||
|
|||
When I print with ICM profiles, I get stripes
wrote in message ... On Thu, 10 Dec 2009 19:12:14 +0100, in comp.periphs.printers Guillaume Dargaud wrote: Hello all, I've had this problem since I started trying to use custom-generated ICM profiles. I have an Epson R1800 printer which works fine in usual modes. I have a Datacolor SpyderPrint calibrator and I've generated profiles for a bunch of papers. Now when I print (in Paint Shop Pro) I do the following in the driver settings: - Glossy / Satin / whatever is closest to the paper type - Photo RPM - ICM -- Driver ICM (Basic) -- input profile sRGB -- Intent perceptual -- Printer profile: whatever my generated profile is. And I get stripes / banding, very visible in the light areas of the images, fine in the darker areas. In particular I get a much darker band in the first 5mm of the print. I've searched the web several times without success and regenerated the profiles a bunch of times. If I disable ICM and use 'Color Control', it prints fine (but then of course the colors are a bit off). Any idea ?!? I won't accept "turn ICM off and use photoshop's native profile handling" as an answer because (1) I don't have photoshop and (2) I would like an app- independent solution. What happens if you use one of the standard Epson paper or other paper manufacturers's papers profiles? First narrow the down where the problem exists. Is it how the Epson driver implements ANY profile or just specifically the ones you create. If the later, then you need to contact Datacolor tech support, imo. It's possible that a newer print driver might solve the situation unless you have it already. This is what I found on the Epson website a moment ago. Printer Driver v6.5cAs Windows 7 32-bit Edition compatible, Windows Vista 32-bit Edition, Windows XP, Windows 2000 epson12332.exe - 12.3MB - posted on 09/04/07 -- Jan Alter |
#3
|
|||
|
|||
When I print with ICM profiles, I get stripes
You have probably explained your problem. Profiling your printer
doesn't causes banding, clogged heads or low ink in the cartridges can, however. You might want to request information about how to clean head clogs with your printer. When the heads get "near clogging" they begin to become intermittent with banding. All Epson printers require some head maintenance. The heads are permanent and they develop dry ink accumulation under the head. The ink wiper, which is supposed to clean the heads and nozzle surface gets contaminated with thickened ink over time and ends up making things worse. These parts require good cleaning, and I have a manual which explains how to do it. The manual is free and the fluids and materials to do it are available at most grocery or $1 stores for a few bucks. If you'd like a copy email me and indicate the issue your printer is experiencing and the printer model involved, so I can email you the correct manual. e-printerhelp(at)mvps(dot)org (at) = @ (dot) = . Art If you are interested in issues surrounding e-waste, I invite you to enter the discussion at my blog: http://e-trashtalk.spaces.live.com/ Guillaume Dargaud wrote: What happens if you use one of the standard Epson paper or other paper manufacturers's papers profiles? First narrow the down where the problem exists. Is it how the Epson driver implements ANY profile or just specifically the ones you create. If the later, then you need to contact Datacolor tech support, imo. Good call... But actually I haven't been able to test it: doing test prints I figured out that the gloss enhancer was partly stuck and proceeded to clean it. Ink 1 ran out. Do again. Ink 2 ran out... Until I had to replace them all. Very cheap as you van tell, and now I'm out of ink to test your suggestion and will need to wait a few days. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
stripes on print-out by BJC-i560x | Markus Elfring | Printers | 10 | February 3rd 06 12:41 AM |
I950 profiles with ACDSee and Canon Easyphoto Print | Don | Printers | 4 | July 19th 04 11:21 AM |
Zebra stripes on CDRs? | SIGGREENE | Cdr | 3 | December 3rd 03 10:05 PM |
weird stripes on pics | SNAKE | Ati Videocards | 1 | November 14th 03 02:33 PM |
AIW 9600 Pro - stripes on display | Mad Martian | Ati Videocards | 5 | November 14th 03 06:55 AM |