If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
ASUS P4P800 - ASUS V9520
I have an ASUS V9520 (GeForce FX 5200) plugged into an ASUS P4P800
Deluxe mobo and run WinXP Pro. I installed the Home Theater SW and I am able to receive and display a cable TV signal on the monitor. However, I can't seem to get any other output from the card. I would like to listen to the cards sound on a headset and have the Windows regular audio go the mobo's integrated output. The manual has very little technical information. I guess the audio jacks on the rear of the card are for digital audio, and the analog is on the breakout box. I have plugged the outputs of the breakout box into a TV and there isn't any signal to the TV except video during the computer's bootup procedure. Evidently when the drivers are loaded the output goes away. I haven't seen any references posted in the newsgroups relating to this problem. --------------------------------------------------------------- bs has been included as part of my e-mail address to reduce the amount of spam mail. Change the 'bs'in my address to 'bellsouth' to send me a message. Bill Burlingame |
#2
|
|||
|
|||
Never mind the question, it's working now.
On Wed, 12 Nov 2003 06:46:09 -0600, William J. Burlingame wrote: I have an ASUS V9520 (GeForce FX 5200) plugged into an ASUS P4P800 Deluxe mobo and run WinXP Pro. I installed the Home Theater SW and I am able to receive and display a cable TV signal on the monitor. However, I can't seem to get any other output from the card. I would like to listen to the cards sound on a headset and have the Windows regular audio go the mobo's integrated output. The manual has very little technical information. I guess the audio jacks on the rear of the card are for digital audio, and the analog is on the breakout box. I have plugged the outputs of the breakout box into a TV and there isn't any signal to the TV except video during the computer's bootup procedure. Evidently when the drivers are loaded the output goes away. I haven't seen any references posted in the newsgroups relating to this problem. --------------------------------------------------------------- bs has been included as part of my e-mail address to reduce the amount of spam mail. Change the 'bs'in my address to 'bellsouth' to send me a message. Bill Burlingame --------------------------------------------------------------- bs has been included as part of my e-mail address to reduce the amount of spam mail. Change the 'bs'in my address to 'bellsouth' to send me a message. Bill Burlingame |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Asus V9520 Magic | Bonobo | Overclocking | 11 | October 8th 04 07:16 PM |
Is ZALMAN CNPS7000A-AlCu compatible with the ASUS P4P800 Deluxe motherboard? | [email protected] | Homebuilt PC's | 4 | April 9th 04 10:19 PM |
New Asus P4P800 Deluxe - No video at all? | Joe Greenman | General | 10 | October 6th 03 06:16 PM |
New Asus P4P800 Deluxe - No video at all? | Joe Greenman | Asus Motherboards | 10 | October 6th 03 06:16 PM |
P4P800 - Can't run Asus Update - BIOSINFO.DLL ERROR Help! | Dirk Puslich | Asus Motherboards | 0 | July 11th 03 10:32 PM |