If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Epson scanner advice
I have used Smart panel with my 89 PC but after I upgraded to XP and
reinstalled my software including Epson 1260 I get the following message "Unable to access the scanner because it is not ready or another application is using it. Close all scanning applications." I used to use Prestol Page manager and it is also installed and it works though the TWAIN is ver 4 instead of ver 5 Any ideas?-- Blair Malcolm |
#2
|
|||
|
|||
"Blair Malcolm" wrote in message ... I have used Smart panel with my 89 PC but after I upgraded to XP and reinstalled my software including Epson 1260 I get the following message "Unable to access the scanner because it is not ready or another application is using it. Close all scanning applications." I used to use Prestol Page manager and it is also installed and it works though the TWAIN is ver 4 instead of ver 5 Any ideas?-- Blair Malcolm Is the scanner a SCSI model? If so install ASPI from Adaptec. XP does not include ASPI support. http://www.adaptec.com/worldwide/sup...s+ASPI+Package Direct link to download: http://download.adaptec.com/software...aspi_471a2.exe -- CSM1 http://www.carlmcmillan.com -- |
#3
|
|||
|
|||
"CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... I have used Smart panel with my 89 PC but after I upgraded to XP and reinstalled my software including Epson 1260 I get the following message "Unable to access the scanner because it is not ready or another application is using it. Close all scanning applications." I used to use Prestol Page manager and it is also installed and it works though the TWAIN is ver 4 instead of ver 5 Any ideas?-- Blair Malcolm Is the scanner a SCSI model? If so install ASPI from Adaptec. XP does not include ASPI support. http://www.adaptec.com/worldwide/sup...s+ASPI+Package Direct link to download: http://download.adaptec.com/software...aspi_471a2.exe -- CSM1 http://www.carlmcmillan.com -- I am not sure what that means. However the scanner has a USB connector.Does that answer you correctly? Blair |
#4
|
|||
|
|||
"Blair Malcolm" wrote in message ... "CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... I have used Smart panel with my 89 PC but after I upgraded to XP and reinstalled my software including Epson 1260 I get the following message "Unable to access the scanner because it is not ready or another application is using it. Close all scanning applications." I used to use Prestol Page manager and it is also installed and it works though the TWAIN is ver 4 instead of ver 5 Any ideas?-- Blair Malcolm Is the scanner a SCSI model? If so install ASPI from Adaptec. XP does not include ASPI support. http://www.adaptec.com/worldwide/sup...s+ASPI+Package Direct link to download: http://download.adaptec.com/software...aspi_471a2.exe -- CSM1 http://www.carlmcmillan.com -- I am not sure what that means. However the scanner has a USB connector.Does that answer you correctly? Blair Yes, it does. You do not need the ASPI, as it is for SCSI connected devices only. Have you gone to Epson for the latest Driver for the Epson 1260? Windows XP needs new software. http://www.epson.com/cgi-bin/Store/s...atform=Windows There are two choices. Click on the plus sign for more information. -- CSM1 http://www.carlmcmillan.com -- |
#5
|
|||
|
|||
"CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... "CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... I have used Smart panel with my 89 PC but after I upgraded to XP and reinstalled my software including Epson 1260 I get the following message "Unable to access the scanner because it is not ready or another application is using it. Close all scanning applications." I used to use Prestol Page manager and it is also installed and it works though the TWAIN is ver 4 instead of ver 5 Any ideas?-- Blair Malcolm Is the scanner a SCSI model? If so install ASPI from Adaptec. XP does not include ASPI support. http://www.adaptec.com/worldwide/sup...s+ASPI+Package Direct link to download: http://download.adaptec.com/software...aspi_471a2.exe -- CSM1 http://www.carlmcmillan.com -- I am not sure what that means. However the scanner has a USB connector.Does that answer you correctly? Blair Yes, it does. You do not need the ASPI, as it is for SCSI connected devices only. Have you gone to Epson for the latest Driver for the Epson 1260? Windows XP needs new software. http://www.epson.com/cgi-bin/Store/s...atform=Windows There are two choices. Click on the plus sign for more information. -- CSM1 http://www.carlmcmillan.com -- Yes I downloaded the latest driver which is TWAIN 5 I ran the scanner on my 98 system with Page manager OK.In addition I ran Smart Panel With my new system running XP I can run Page manager (TWAIN is Ver 4) I have downloaded TWAIN Ver 5 but page manager still opts for Ver 4 I cab open Smart Panel but when I try and open the TWAIN driver, I get the message"Unable to access the scanner because it is not ready or neither supplication d using it." Somehow XP is excluding Smart Panel Any further ideas? Blair |
#6
|
|||
|
|||
"Blair Malcolm" wrote in message ... "CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... "CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... I have used Smart panel with my 89 PC but after I upgraded to XP and reinstalled my software including Epson 1260 I get the following message "Unable to access the scanner because it is not ready or another application is using it. Close all scanning applications." I used to use Prestol Page manager and it is also installed and it works though the TWAIN is ver 4 instead of ver 5 Any ideas?-- Blair Malcolm Is the scanner a SCSI model? If so install ASPI from Adaptec. XP does not include ASPI support. http://www.adaptec.com/worldwide/sup...s+ASPI+Package Direct link to download: http://download.adaptec.com/software...aspi_471a2.exe -- CSM1 http://www.carlmcmillan.com -- I am not sure what that means. However the scanner has a USB connector.Does that answer you correctly? Blair Yes, it does. You do not need the ASPI, as it is for SCSI connected devices only. Have you gone to Epson for the latest Driver for the Epson 1260? Windows XP needs new software. http://www.epson.com/cgi-bin/Store/s...atform=Windows There are two choices. Click on the plus sign for more information. -- CSM1 http://www.carlmcmillan.com -- Yes I downloaded the latest driver which is TWAIN 5 I ran the scanner on my 98 system with Page manager OK.In addition I ran Smart Panel With my new system running XP I can run Page manager (TWAIN is Ver 4) I have downloaded TWAIN Ver 5 but page manager still opts for Ver 4 I cab open Smart Panel but when I try and open the TWAIN driver, I get the message"Unable to access the scanner because it is not ready or neither supplication d using it." Somehow XP is excluding Smart Panel Any further ideas? Blair Have you uninstalled Twain 4? In Page Manager and in Smart Panel re-run the Scanner setup, if there is a scanner setup. I think there is a Select Twain Source in Page Manager that lets you choose the TWAIN driver. I do not know if Smart Panel also has a Select Twain Source, Look for it. Why can't I start EPSON TWAIN? http://www.epson.com/cgi-bin/Store/s...subcat =30983 Frequently Asked Questions http://www.epson.com/cgi-bin/Store/s...egory=Products -- CSM1 http://www.carlmcmillan.com -- |
#7
|
|||
|
|||
"CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... "CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... "CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... I have used Smart panel with my 89 PC but after I upgraded to XP and reinstalled my software including Epson 1260 I get the following message "Unable to access the scanner because it is not ready or another application is using it. Close all scanning applications." I used to use Prestol Page manager and it is also installed and it works though the TWAIN is ver 4 instead of ver 5 Any ideas?-- Blair Malcolm Is the scanner a SCSI model? If so install ASPI from Adaptec. XP does not include ASPI support. http://www.adaptec.com/worldwide/sup...s+ASPI+Package Direct link to download: http://download.adaptec.com/software...aspi_471a2.exe -- CSM1 http://www.carlmcmillan.com -- I am not sure what that means. However the scanner has a USB connector.Does that answer you correctly? Blair Yes, it does. You do not need the ASPI, as it is for SCSI connected devices only. Have you gone to Epson for the latest Driver for the Epson 1260? Windows XP needs new software. http://www.epson.com/cgi-bin/Store/s...atform=Windows There are two choices. Click on the plus sign for more information. -- CSM1 http://www.carlmcmillan.com -- Yes I downloaded the latest driver which is TWAIN 5 I ran the scanner on my 98 system with Page manager OK.In addition I ran Smart Panel With my new system running XP I can run Page manager (TWAIN is Ver 4) I have downloaded TWAIN Ver 5 but page manager still opts for Ver 4 I cab open Smart Panel but when I try and open the TWAIN driver, I get the message"Unable to access the scanner because it is not ready or neither supplication d using it." Somehow XP is excluding Smart Panel Any further ideas? Blair Have you uninstalled Twain 4? In Page Manager and in Smart Panel re-run the Scanner setup, if there is a scanner setup. I think there is a Select Twain Source in Page Manager that lets you choose the TWAIN driver. I do not know if Smart Panel also has a Select Twain Source, Look for it. Why can't I start EPSON TWAIN? http://www.epson.com/cgi-bin/Store/s...subcat =30983 Frequently Asked Questions http://www.epson.com/cgi-bin/Store/s...egory=Products -- CSM1 http://www.carlmcmillan.com -- Thanks for you help. After reading all the articles I chose to delete all files and start again When I tried to download the software I got the message"In the current Windows system there are no applications which will run normally" So I could not download the Page manager I did download the Smart Panel but when I tried to run it I got"Unable to access he Scanner because it is not ready or another application is using it" Both programmes run on my 98 PC OK Blair |
#8
|
|||
|
|||
"Blair Malcolm" wrote in message
... "CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... "CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... "CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... I have used Smart panel with my 89 PC but after I upgraded to XP and reinstalled my software including Epson 1260 I get the following message "Unable to access the scanner because it is not ready or another application is using it. Close all scanning applications." I used to use Prestol Page manager and it is also installed and it works though the TWAIN is ver 4 instead of ver 5 Any ideas?-- Blair Malcolm Is the scanner a SCSI model? If so install ASPI from Adaptec. XP does not include ASPI support. http://www.adaptec.com/worldwide/sup...s+ASPI+Package Direct link to download: http://download.adaptec.com/software...aspi_471a2.exe -- CSM1 http://www.carlmcmillan.com -- I am not sure what that means. However the scanner has a USB connector.Does that answer you correctly? Blair Yes, it does. You do not need the ASPI, as it is for SCSI connected devices only. Have you gone to Epson for the latest Driver for the Epson 1260? Windows XP needs new software. http://www.epson.com/cgi-bin/Store/s...atform=Windows There are two choices. Click on the plus sign for more information. -- CSM1 http://www.carlmcmillan.com -- Yes I downloaded the latest driver which is TWAIN 5 I ran the scanner on my 98 system with Page manager OK.In addition I ran Smart Panel With my new system running XP I can run Page manager (TWAIN is Ver 4) I have downloaded TWAIN Ver 5 but page manager still opts for Ver 4 I cab open Smart Panel but when I try and open the TWAIN driver, I get the message"Unable to access the scanner because it is not ready or neither supplication d using it." Somehow XP is excluding Smart Panel Any further ideas? Blair Have you uninstalled Twain 4? In Page Manager and in Smart Panel re-run the Scanner setup, if there is a scanner setup. I think there is a Select Twain Source in Page Manager that lets you choose the TWAIN driver. I do not know if Smart Panel also has a Select Twain Source, Look for it. Why can't I start EPSON TWAIN? http://www.epson.com/cgi-bin/Store/s...subcat =30983 Frequently Asked Questions http://www.epson.com/cgi-bin/Store/s...egory=Products -- CSM1 http://www.carlmcmillan.com -- Thanks for you help. After reading all the articles I chose to delete all files and start again When I tried to download the software I got the message"In the current Windows system there are no applications which will run normally" So I could not download the Page manager I did download the Smart Panel but when I tried to run it I got"Unable to access he Scanner because it is not ready or another application is using it" Both programmes run on my 98 PC OK Blair I hope you have disconnected the scanner before installing software because the software has to be fully installed before connecting the scanner. Be sure to turn off all virus scanning software you may have installed on your computer before installing Epson software. Start Here Card. http://files.support.epson.com/pdf/pr126_/pr126_bb.pdf Must have Adobe Acrobat Reader to view above file. Did you just delete the files or did you do a un-install of all of the Epson software via Window Add/Remove programs in the control panel? If you just deleted the files, you made a huge error. Windows puts "stuff" all over the windows operating system to install software and Device drivers. There are procedures to remove the software that must be used. I do not know what else I can help you with. You seem to have done everything possible, except a system clean out of all of the Epson Scanner files and Epson scanner entries in the Windows registry. Also a clean install of Windows XP would put the computer to like new condition. That is not a job for someone not an expert on their computer. You probably need to find an expert in your area. -- CSM1 http://www.carlmcmillan.com -- |
#9
|
|||
|
|||
"CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... "CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... "CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... "CSM1" wrote in message . com... "Blair Malcolm" wrote in message ... I have used Smart panel with my 89 PC but after I upgraded to XP and reinstalled my software including Epson 1260 I get the following message "Unable to access the scanner because it is not ready or another application is using it. Close all scanning applications." I used to use Prestol Page manager and it is also installed and it works though the TWAIN is ver 4 instead of ver 5 Any ideas?-- Blair Malcolm Is the scanner a SCSI model? If so install ASPI from Adaptec. XP does not include ASPI support. http://www.adaptec.com/worldwide/sup...s+ASPI+Package Direct link to download: http://download.adaptec.com/software...aspi_471a2.exe -- CSM1 http://www.carlmcmillan.com -- I am not sure what that means. However the scanner has a USB connector.Does that answer you correctly? Blair Yes, it does. You do not need the ASPI, as it is for SCSI connected devices only. Have you gone to Epson for the latest Driver for the Epson 1260? Windows XP needs new software. http://www.epson.com/cgi-bin/Store/s...atform=Windows There are two choices. Click on the plus sign for more information. -- CSM1 http://www.carlmcmillan.com -- Yes I downloaded the latest driver which is TWAIN 5 I ran the scanner on my 98 system with Page manager OK.In addition I ran Smart Panel With my new system running XP I can run Page manager (TWAIN is Ver 4) I have downloaded TWAIN Ver 5 but page manager still opts for Ver 4 I cab open Smart Panel but when I try and open the TWAIN driver, I get the message"Unable to access the scanner because it is not ready or neither supplication d using it." Somehow XP is excluding Smart Panel Any further ideas? Blair Have you uninstalled Twain 4? In Page Manager and in Smart Panel re-run the Scanner setup, if there is a scanner setup. I think there is a Select Twain Source in Page Manager that lets you choose the TWAIN driver. I do not know if Smart Panel also has a Select Twain Source, Look for it. Why can't I start EPSON TWAIN? http://www.epson.com/cgi-bin/Store/s...subcat =30983 Frequently Asked Questions http://www.epson.com/cgi-bin/Store/s...egory=Products -- CSM1 http://www.carlmcmillan.com -- Thanks for you help. After reading all the articles I chose to delete all files and start again When I tried to download the software I got the message"In the current Windows system there are no applications which will run normally" So I could not download the Page manager I did download the Smart Panel but when I tried to run it I got"Unable to access he Scanner because it is not ready or another application is using it" Both programmes run on my 98 PC OK Blair I hope you have disconnected the scanner before installing software because the software has to be fully installed before connecting the scanner. Be sure to turn off all virus scanning software you may have installed on your computer before installing Epson software. Start Here Card. http://files.support.epson.com/pdf/pr126_/pr126_bb.pdf Must have Adobe Acrobat Reader to view above file. Did you just delete the files or did you do a un-install of all of the Epson software via Window Add/Remove programs in the control panel? If you just deleted the files, you made a huge error. Windows puts "stuff" all over the windows operating system to install software and Device drivers. There are procedures to remove the software that must be used. I do not know what else I can help you with. You seem to have done everything possible, except a system clean out of all of the Epson Scanner files and Epson scanner entries in the Windows registry. Also a clean install of Windows XP would put the computer to like new condition. That is not a job for someone not an expert on their computer. You probably need to find an expert in your area. -- CSM1 http://www.carlmcmillan.com -- Thanks for your help. By using the information you gave me I have at last succeeded in getting the latest TWAIN driver working on my XP Everything is sweetness and light again Regards Blair |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Scanner Advice Please | John | Scanners | 3 | November 21st 04 12:10 AM |
Epson 1660 scanner TWAIN / unknown device problem | Nicolai Michel | Scanners | 1 | January 20th 04 03:09 PM |
Epson Scanner and Omnipage pro | N.O. Body | Scanners | 2 | December 13th 03 10:44 PM |
Having driver problems getting my new Epson 3170 Photo image scanner to install | Idris Alooma | Scanners | 5 | September 26th 03 06:55 PM |
Problems with Epson scanner | hal | Scanners | 0 | July 6th 03 02:45 AM |