Celeron D overclock.

Cheapo new PC's ordered at work came with these new 'Celeron D - 325'
2.53Ghz. They were fitted with different fans than intel retail box.

Put in a stick of 512 DDR400. Straight into BIOS, changed FSB from 133 to
200 x 19(locked). Booted up straight at 3.8GHZ. Idle temp 42c, full load
temp 62c.
Could only run a few CPU benchmarks due to onboard graphics.

3D MARK 2003 default - CPU SCORE - 732
PCMARK 2004 CPU - 5096
CPU MARK 99 - 228

Alein p wrote:
Cheapo new PC's ordered at work came with these new 'Celeron D - 325'
2.53Ghz. They were fitted with different fans than intel retail box.

Put in a stick of 512 DDR400. Straight into BIOS, changed FSB from
133 to 200 x 19(locked). Booted up straight at 3.8GHZ. Idle temp 42c,
full load temp 62c.
Could only run a few CPU benchmarks due to onboard graphics.

3D MARK 2003 default - CPU SCORE - 732
PCMARK 2004 CPU - 5096
CPU MARK 99 - 228

That's pretty impressive. A better CPUMark99 than a Barton 3200+ (Around
210). 3.8Ghz huh? Pretty impressive. Have you tested for stability with
Prime95?
--
~misfit~

On Mon, 5 Jul 2004 22:25:34 +0100, "Alein p"
wrote:

Cheapo new PC's ordered at work came with these new 'Celeron D - 325'
2.53Ghz. They were fitted with different fans than intel retail box.

Put in a stick of 512 DDR400. Straight into BIOS, changed FSB from 133 to
200 x 19(locked). Booted up straight at 3.8GHZ. Idle temp 42c, full load
temp 62c.
Could only run a few CPU benchmarks due to onboard graphics.

.... yep, it looks there out is a new OC king ... even if it is based
on a PrescHot core (as I saw reviews on the Net, heats less than P4
prescot core, but still a lot IMO ) ...

--
Regards, SPAJKY ®
& visit my site @ http://www.spajky.vze.com
"Tualatin OC-ed / BX-Slot1 / inaudible setup!"
E-mail AntiSpam: remove ##

Hi,

It puts out less heat because it has far less cache than the normal
Precott. But, for a budget cpu is making some running for the XP+
series finally...

Cheers,
-------------------------------------------------------
Stormgiant

Asus P4P800-Deluxe
NW3000@3915 FSB261 on WC
512MB OCZ BH-5 @DDR522 2-2-2-5
Power Color ATi 9800XT 520/410
-------------------------------------------------------


On Wed, 07 Jul 2004 12:23:18 +0200, Spajky wrote:

On Mon, 5 Jul 2004 22:25:34 +0100, "Alein p"
wrote:

Cheapo new PC's ordered at work came with these new 'Celeron D - 325'
2.53Ghz. They were fitted with different fans than intel retail box.

Put in a stick of 512 DDR400. Straight into BIOS, changed FSB from 133 to
200 x 19(locked). Booted up straight at 3.8GHZ. Idle temp 42c, full load
temp 62c.
Could only run a few CPU benchmarks due to onboard graphics.

... yep, it looks there out is a new OC king ... even if it is based
on a PrescHot core (as I saw reviews on the Net, heats less than P4
prescot core, but still a lot IMO ) ...

I bought a 2.66 cel d and I have it running perfectly stable at 160mh
fsb (3.2gh). It would crash programs, including
prime95/pcmark04/3dmark03 at 166. Given the small difference in
speed, I'm sure that I could easily do 166 with a little more
voltage, but my ecs 865pe-a has NO VOLTAGE CHANGING!!! Sorry about
that.
Hehehe...
Interestingly enough, my cel is paired with a single crucial 256mb
pc2100 stick (shows as infineon pc2700 in cpu-z), but the ram will
run at 166mh 2-2-2-5 and 200mh 2-3-2-5 (the 3 is ras/cas, I'm not
sure which number it should be).
So, right now the cpu is 160 and ram is 200 in 4:5 mode.
JJ

==============
Posted through www.HowToFixComputers.com/bb - free access to hardware troubleshooting newsgroups.