A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » General
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

reboot fails



 
 
Thread Tools Display Modes
  #1  
Old June 23rd 03, 06:07 PM
Joshua Klehm
external usenet poster
 
Posts: n/a
Default reboot fails


"Frederik" wrote in message I'm patching up an old pc I got (p1-100, soyo
mobo). First it didn't boot
and as it reported a faulty bios cmos checksum I flashed the bios. I also
had to replace the memory as it was faulty.

(The person I got the pc from claims that it fell over in the boot of the
car when transporting it, which is probably the reason for its faulty
behaviour. Or am I wrong?)

Now, everything seems to work fine, apart from the fact that the pc
occasionally does not boot (no display, the hdd is spinning but is not
reading) and that it cannot reboot. Neither soft, nor hard reboot works.

As I thought the psu was causing the problem, I replaced it with another

one
(same wattage), but this didn't solve it.

Any ideas are greatly appreciated.

Frederik



You mobo may be bad.
--
I believe in having an open mind,
but not so open that my brains fall out.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:12 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.