A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Printers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Xerox Workcentre Pro 35 pcl codes



 
 
Thread Tools Display Modes
  #1  
Old December 17th 04, 06:10 PM
external usenet poster
 
Posts: n/a
Default Xerox Workcentre Pro 35 pcl codes

Does anyone have the PCL codes for all trays of the
Xerox Workcentre Pro 35? I need to print simple dos
documents to specific trays.

Please help!!


--
Met vriendelijke groet,

Johan



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.817 / Virus Database: 555 - Release Date: 15-12-2004


  #2  
Old December 21st 04, 02:00 PM
Alan
external usenet poster
 
Posts: n/a
Default

On Fri, 17 Dec 2004 18:10:15 +0100, wrote:

Does anyone have the PCL codes for all trays of the
Xerox Workcentre Pro 35? I need to print simple dos
documents to specific trays.


A PCL5 reference gives this:
The Output Bin Selection command selects either of the two output
paper bins (upper or lower [rear]) for paper output.
esc&l#G
# = 1 - Upper Output Bin
2 - Lower (Rear) Output Bin
Default = Upper Output Bin
Range = 1, 2

So try this, and if you have more than two trays, just see what
happens with # = 3, 4, etc.

Also you might try the PJL command OUTBIN:
OUTBIN Sets the default output bin.
values: UPPER, LOWER,
OPTIONALOUTPUTBIN1, . . .OPTIONALOUTPUTBIN62

PJL commands go before and after the PCL of the actual page. Most
printers that support PCL5 or above can use PJL.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do Xerox Workcentre printers detect ink levels? romperkid Printers 0 November 30th 04 08:40 PM
Beware Xerox Phaser 860 printer Dirk Hartog Printers 13 September 20th 04 03:10 PM
xerox M940 workcentre Brian Dollery Printers 0 June 20th 04 06:17 PM
Xerox mechanical failure due to cover weight, No support from Xerox!!!!! Frank Pittel Printers 1 April 6th 04 09:18 AM
Xerox Workcentre 940M XP Communication Problems John Marchioli Printers 0 December 29th 03 02:55 PM


All times are GMT +1. The time now is 01:41 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.