If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
"The loaded disc is not empty..." with new DVD+RWs from ISOs in CDBurnerXP Pro.
Hello,
I downloaded Windows Vista beta 2 ISO (3 GB!) file from http://download.windowsvista.com/pre...6/download.htm overnight. I am trying to burn the image to DVD+RWs (Office Depot brand -- 4.7 GB) with CDBurnerXP Pro v3.0.116. I assume the HP DVD burner Writer 300c (USB; latest firmware) is compatible and works because I have no problems adding and erasing files with HP's DVD burner software. However, it cannot write to DVDs from ISO images. Hence, why I am using CDBurnerXP Pro. I tried unformatted and erased (quick and full) DVDs with CDBurnerXP Pro, but it refused to burn the ISO file to them. I also checked the ISO file with ISOBuster v1.9, and it looked OK (no errors I guess since I could explore and read its readme.txt file). Am I doing something wrong? I had expierences in burning to CD-RWs from ISO files without any problems on my home's old Plextor CD burner and Nero. I am using Windows XP Pro. SP2 (all updates). What am I doing wrong? Am I using the wrong program or setup? Thank you in advance. -- "Oh bother", said Winnie the Pooh, "There's an ant on my foot..." /\___/\ / /\ /\ \ Phillip (Ant) @ http://antfarm.ma.cx (Personal Web Site) | |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net \ _ / Please remove ANT if replying by e-mail. ( ) |
#2
|
|||
|
|||
"The loaded disc is not empty..." with new DVD+RWs from ISOs inCDBurnerXP Pro.
.. --------------------------------------
Mike Richter, were you born with "Scam Artist" emblazoned on your face? -------------------------------------- wrote: I downloaded Windows Vista beta 2 ISO (3 GB!) file from http://download.windowsvista.com/pre...6/download.htm overnight. I am trying to burn the image to DVD+RWs (Office Depot brand -- 4.7 GB) with CDBurnerXP Pro v3.0.116. I assume the HP DVD burner Writer 300c (USB; latest firmware) is compatible and works because I have no problems adding and erasing files with HP's DVD burner software. However, it cannot write to DVDs from ISO images. Hence, why I am using CDBurnerXP Pro. I tried unformatted and erased (quick and full) DVDs with CDBurnerXP Pro, but it refused to burn the ISO file to them. I also checked the ISO file with ISOBuster v1.9, and it looked OK (no errors I guess since I could explore and read its readme.txt file). Am I doing something wrong? I had expierences in burning to CD-RWs from ISO files without any problems on my home's old Plextor CD burner and Nero. I am using Windows XP Pro. SP2 (all updates). What am I doing wrong? Am I using the wrong program or setup? Thank you in advance. Try with ImgBurn: http://www.mrbass.org/dvdburn/ .. ================================================== ====== Who Is Mike Richter and Why Are They Saying All These Horrible Things About Him? ================================================== ====== (No Mikey S-Lickers have been able to prove ANY of the following is) ( a LIBEL -- despite Mikey claimed to have proof of misquotes !! ) Mike Richter's Cockamamie Mumbo Jumbo on TOC (01-06) Mike Richter's Cockamamie Mumbo Jumbo on TOC (07-02) Mike Richter's Cockamamie Mumbo Jumbo on TOC (elementary) Mike Richter's Cockamamie Mumbo Jumbo on TOC (multisession) Mike Richter's Cockamamie Mumbo Jumbo on Packet Writing (TOC) Mike Richter's Cockamamie Mumbo Jumbo on TOC (dvd) ===================================== From: smh Date: 2/25/06 Subject: DVD recognized only on my PC - new data found Mike Richter (The Slimiest Friggin ****) crapped: It seems likely to me that you have errors in the TOC There is no "TOC" on DVD, Friggin Freak! ======================================== .. |
#3
|
|||
|
|||
"The loaded disc is not empty..." with new DVD+RWs from ISOs in CDBurnerXP Pro.
Does your burner support the type of DVD+RW that you're using? If it's a 2x
burner, it may not support 4x discs, and so on. wrote in message et... Hello, I downloaded Windows Vista beta 2 ISO (3 GB!) file from http://download.windowsvista.com/pre...6/download.htm overnight. I am trying to burn the image to DVD+RWs (Office Depot brand -- 4.7 GB) with CDBurnerXP Pro v3.0.116. I assume the HP DVD burner Writer 300c (USB; latest firmware) is compatible and works because I have no problems adding and erasing files with HP's DVD burner software. However, it cannot write to DVDs from ISO images. Hence, why I am using CDBurnerXP Pro. I tried unformatted and erased (quick and full) DVDs with CDBurnerXP Pro, but it refused to burn the ISO file to them. I also checked the ISO file with ISOBuster v1.9, and it looked OK (no errors I guess since I could explore and read its readme.txt file). Am I doing something wrong? I had expierences in burning to CD-RWs from ISO files without any problems on my home's old Plextor CD burner and Nero. I am using Windows XP Pro. SP2 (all updates). What am I doing wrong? Am I using the wrong program or setup? Thank you in advance. -- "Oh bother", said Winnie the Pooh, "There's an ant on my foot..." /\___/\ / /\ /\ \ Phillip (Ant) @ http://antfarm.ma.cx (Personal Web Site) | |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net \ _ / Please remove ANT if replying by e-mail. ( ) |
#5
|
|||
|
|||
"The loaded disc is not empty..." with new DVD+RWs from ISOs in CDBurnerXP Pro.
In alt.comp.periphs.cdr Dan G wrote:
Does your burner support the type of DVD+RW that you're using? If it's a 2x burner, it may not support 4x discs, and so on. Yep, even on the external DVD burner drive itself it said DVD+RW. I am going to try a HP brand of DVD+RW that came with the drive tomorrow and see if that helps. Its speed is 1X/2.4X. IIRC, the Office Depot brand was 2.4X in CDBurnerXP Pro. Also, I tried Roxio Easy CD Creator Basic. It detected the drive, but I don't think it can burn to DVDs? It's a bit old (v5.3.5; 2003). My DVD burner drive is: http://tinyurl.com/kqysj or http://h10025.www1.hp.com/ewfrf/wc/p...&cc=us&y=0&x=0 (must had misread the e as c). wrote in message et... Hello, I downloaded Windows Vista beta 2 ISO (3 GB!) file from http://download.windowsvista.com/pre...6/download.htm overnight. I am trying to burn the image to DVD+RWs (Office Depot brand -- 4.7 GB) with CDBurnerXP Pro v3.0.116. I assume the HP DVD burner Writer 300c (USB; latest firmware) is compatible and works because I have no problems adding and erasing files with HP's DVD burner software. However, it cannot write to DVDs from ISO images. Hence, why I am using CDBurnerXP Pro. I tried unformatted and erased (quick and full) DVDs with CDBurnerXP Pro, but it refused to burn the ISO file to them. I also checked the ISO file with ISOBuster v1.9, and it looked OK (no errors I guess since I could explore and read its readme.txt file). Am I doing something wrong? I had expierences in burning to CD-RWs from ISO files without any problems on my home's old Plextor CD burner and Nero. I am using Windows XP Pro. SP2 (all updates). What am I doing wrong? Am I using the wrong program or setup? Thank you in advance. -- "Oh bother", said Winnie the Pooh, "There's an ant on my foot..." /\___/\ / /\ /\ \ Phillip (Ant) @ http://antfarm.ma.cx (Personal Web Site) | |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net \ _ / Please remove ANT if replying by e-mail. ( ) |
#6
|
|||
|
|||
"The loaded disc is not empty..." with new DVD+RWs from ISOs in CDBurnerXP Pro.
In alt.comp.periphs.cdr wrote:
Hello, I downloaded Windows Vista beta 2 ISO (3 GB!) file from http://download.windowsvista.com/pre...6/download.htm overnight. I am trying to burn the image to DVD+RWs (Office Depot brand -- 4.7 GB) with CDBurnerXP Pro v3.0.116. I assume the HP DVD burner Writer 300c (USB; latest firmware) is compatible and works because I have no problems adding and erasing files with HP's DVD burner software. However, it cannot write to DVDs from ISO images. Hence, why I am using CDBurnerXP Pro. I tried unformatted and erased (quick and full) DVDs with CDBurnerXP Pro, but it refused to burn the ISO file to them. I also checked the ISO file with ISOBuster v1.9, and it looked OK (no errors I guess since I could explore and read its readme.txt file). Am I doing something wrong? I had expierences in burning to CD-RWs from ISO files without any problems on my home's old Plextor CD burner and Nero. I am using Windows XP Pro. SP2 (all updates). What am I doing wrong? Am I using the wrong program or setup? Thank you in advance. OK, I think I fixed the problem. It appears that Windows XP needed a reboot (sheesh). Before that, I tried a HP brand of DVD+RW that came with the burner, and that failed in both Roxio Easy CD Creator and CDBurnerXP Pro. I was able to burn Vista ISO in both products and DVD+RW brands. -- "Oh bother", said Winnie the Pooh, "There's an ant on my foot..." /\___/\ / /\ /\ \ Phillip (Ant) @ http://antfarm.ma.cx (Personal Web Site) | |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net \ _ / Please remove ANT if replying by e-mail. ( ) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Nothing But Coasters | dadiOH | Cdr | 11 | February 28th 06 12:48 AM |
spinrite6.0 - is it easy to break then remake RAID1 on SiI3112 controller(A7N8X mobo)? | Alex Hunsley | Asus Motherboards | 8 | June 2nd 05 02:16 PM |
writing cd`s | biggmark | Cdr | 7 | December 31st 04 08:57 AM |
When Good Discs Go Bad | Ablang | General | 0 | June 27th 04 03:47 AM |