If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Odd voltage and MBM5 sensor readings
I am using an ASUS A7N8X v2 Deluxe bios 1005 mobo with an Athlon XP
2500+ oc to 2800+, Windows XP. I have been using the normal ASUS Probe (v2.19.07) to make sure my temperatures are within boundries while tweaking settings. I have been looking into more seriously ocing my system. I installed MBM5 so I can watch my sensor readings more carefully. I installed MBM5 (5.3.5.0) and Prime95 (23.7). After a reboot, I turn on ASUS Probe and it is telling me that my +5v jumps spontaneously to 6.8xx. Does anyone have any idea what might be causing this? Also, for some odd reason (after selecting my board in MBM5 as the v2 rev) MBM5 is reading my CPU as running at ~192 C. So I'm wondering what the hell is going on. Any help would be extremely appreciated as I do not wish to continue until I can get accurate readings! -- Athlon XP 2500+ OC to 2800+ ASUS A7N8X Deluxe 1024MB PC3200 ATI Radeon 9500 128MB Thermaltake Volcano 7+ 40GB Maxtor DMA133 80GB Seagate DMA100 Plextor PX-708A v1.04 BTC 316B 16x DVD-Rom |
#2
|
|||
|
|||
this seems to be a flaw in asus software as I have it happen on several asus
motherboards, is there a way you can physically check your temps. and volts to compare with the readings the software is showing? "Peter Garbarino" wrote in message news:fBbMb.24424$xy6.63149@attbi_s02... I am using an ASUS A7N8X v2 Deluxe bios 1005 mobo with an Athlon XP 2500+ oc to 2800+, Windows XP. I have been using the normal ASUS Probe (v2.19.07) to make sure my temperatures are within boundries while tweaking settings. I have been looking into more seriously ocing my system. I installed MBM5 so I can watch my sensor readings more carefully. I installed MBM5 (5.3.5.0) and Prime95 (23.7). After a reboot, I turn on ASUS Probe and it is telling me that my +5v jumps spontaneously to 6.8xx. Does anyone have any idea what might be causing this? Also, for some odd reason (after selecting my board in MBM5 as the v2 rev) MBM5 is reading my CPU as running at ~192 C. So I'm wondering what the hell is going on. Any help would be extremely appreciated as I do not wish to continue until I can get accurate readings! -- Athlon XP 2500+ OC to 2800+ ASUS A7N8X Deluxe 1024MB PC3200 ATI Radeon 9500 128MB Thermaltake Volcano 7+ 40GB Maxtor DMA133 80GB Seagate DMA100 Plextor PX-708A v1.04 BTC 316B 16x DVD-Rom |
#3
|
|||
|
|||
"Peter Garbarino" wrote in message news:fBbMb.24424$xy6.63149@attbi_s02... I am using an ASUS A7N8X v2 Deluxe bios 1005 mobo with an Athlon XP 2500+ oc to 2800+, Windows XP. I have been using the normal ASUS Probe (v2.19.07) to make sure my temperatures are within boundries while tweaking settings. I have been looking into more seriously ocing my system. I installed MBM5 so I can watch my sensor readings more carefully. I installed MBM5 (5.3.5.0) and Prime95 (23.7). After a reboot, I turn on ASUS Probe and it is telling me that my +5v jumps spontaneously to 6.8xx. Does anyone have any idea what might be causing this? Also, for some odd reason (after selecting my board in MBM5 as the v2 rev) MBM5 is reading my CPU as running at ~192 C. So I'm wondering what the hell is going on. Any help would be extremely appreciated as I do not wish to continue until I can get accurate readings! Are you running both programs at the same time? You will get inaccurate readings if you do. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Overclocking A7N8X / 3200+ | [email protected] | Overclocking AMD Processors | 16 | October 4th 03 09:44 AM |