A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Gigabyte Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

GA-7N400 Pro 2 Rev 2 / 7N400-L DIMM 1&3 no go



 
 
Thread Tools Display Modes
  #1  
Old July 2nd 04, 02:23 PM
cyclone
external usenet poster
 
Posts: n/a
Default GA-7N400 Pro 2 Rev 2 / 7N400-L DIMM 1&3 no go

FWIW a friend and I have found an issue with my 7N400 Pro2 Rev 2 and his
7N400-L when trying to run 2 x 512mb sticks of PC3200 in dual channel in
DIMM slots DDR1 & DDR3. Very unstable.

If you use slots DDR1 & DDR4 both boards run solid as a rock in dual
channel.

Experienced this when using a matched set of 2 x 512mb of Kingston PC3200
CL3 (KVR400X64C3AK2/1G) in both the 7N400 Pro 2 Rev 2 & 7N400-L.

He also tried 2 x 512mb of cheaper Elixir ram in the 7N400-L with same
issue - DIMM 1&3 unstable, DIMM 1&4 rock solid.

We flashed to latest bios for our respective boards but did not make any
difference.

Tony



  #2  
Old August 16th 04, 11:25 PM
Kaptain Krunch
external usenet poster
 
Posts: n/a
Default

Hmmmm, I run 1&3 rock solid both DS modules... you can have SS in 1 &3
also... look in the chart in the manual

KK

"cyclone" wrote in message
...
FWIW a friend and I have found an issue with my 7N400 Pro2 Rev 2 and his
7N400-L when trying to run 2 x 512mb sticks of PC3200 in dual channel in
DIMM slots DDR1 & DDR3. Very unstable.

If you use slots DDR1 & DDR4 both boards run solid as a rock in dual
channel.

Experienced this when using a matched set of 2 x 512mb of Kingston PC3200
CL3 (KVR400X64C3AK2/1G) in both the 7N400 Pro 2 Rev 2 & 7N400-L.

He also tried 2 x 512mb of cheaper Elixir ram in the 7N400-L with same
issue - DIMM 1&3 unstable, DIMM 1&4 rock solid.

We flashed to latest bios for our respective boards but did not make any
difference.

Tony





 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
P4PE-X .....ASUS says only one DIMM when running 800Mhz! [email protected] Asus Motherboards 2 December 24th 04 06:51 PM
What is the differance in single and double sided memory. SPAWN Asus Motherboards 5 December 12th 04 12:15 AM
128mb PC133 dimm vs. i810e chipset Jeff Bean General 0 October 7th 04 12:29 AM
GA-5AX problem: showing 256MB RAM with 2x256MB DIMM Barry Gigabyte Motherboards 1 January 3rd 04 07:17 PM
Difference between 7N400 PRO /7N400 PRO Nforce2 [email protected]\(news\) Gigabyte Motherboards 1 November 24th 03 04:47 PM


All times are GMT +1. The time now is 06:47 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.