If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Pentium3 socket 370 sur Asus P3BF avec adaptateur (slot one-socket 370)
Bonjour,
Je souhaite faire évoluer mon processeur (actuellement un P3 à 550 Mhz en slot one ) par un P3 à 1 Ghz type coppermine avec un FSB de 133 mhz et un voltage core à 1,75V en socket 370. J'ai donc acheté d'occasion un adaptateur socket 370 pour slot one. Pour info, si vious pensez que ca vient de là, il s'agit d'un adaptateur "tout automatique" (pas de jumper). J'ai monté le tout sur ma carte mère Asus p3b-f ver 1.04 sans modifier les cavaliers de configuration. (ils sont tous règlés en position "par défaut" et "jumper free").J'ai mis à jour le BIOS avec la dernière version Mon problème : Mon PC ne boote plus ! Pas de bip, ecran noir. Pas de démarrage du bios. NB : qd je remets l'ancien processeur à 550 Mhz, le micro redémarre comme il faut ... mais à 550 Mhz. Merci par avance pour votre contribution. |
#2
|
|||
|
|||
Pentium3 socket 370 sur Asus P3BF avec adaptateur (slot one-socket 370)
Perriot-Lebarq schrieb:
Bonjour, Je souhaite faire évoluer mon processeur (actuellement un P3 à 550 Mhz en slot one ) par un P3 à 1 Ghz type coppermine avec un FSB de 133 mhz et un voltage core à 1,75V en socket 370. J'ai donc acheté d'occasion un adaptateur socket 370 pour slot one. Pour info, si vious pensez que ca vient de là, il s'agit d'un adaptateur "tout automatique" (pas de jumper). That could be an old PPGA-only adapter for Mendocino Celerons only - and that wouldn't work with your processor, thus your problem. An adapter compatible with Coppermines would have to have at least a "Celeron - Coppermine" jumper, and even then not all of them would be suited: http://support.intel.com/support/pro.../CS-007585.htm You'll probably need another slot adapter suitable for Coppermines. (Tualatin adapters tend to support Coppermines as well, at least the Slot-T does.) Stephan -- Home: http://stephan.win31.de/ PC#6: i440BX, 2xP3-500E, 704 MiB, 250+80 GB, R9k AGP 64 MiB, 110W |
#3
|
|||
|
|||
Pentium3 socket 370 sur Asus P3BF avec adaptateur (slot one-socket 370)
Perriot-Lebarq wrote:
Bonjour, Je souhaite faire évoluer mon processeur (actuellement un P3 à 550 Mhz en slot one ) par un P3 à 1 Ghz type coppermine avec un FSB de 133 mhz et un voltage core à 1,75V en socket 370. J'ai donc acheté d'occasion un adaptateur socket 370 pour slot one. Pour info, si vious pensez que ca vient de là, il s'agit d'un adaptateur "tout automatique" (pas de jumper). J'ai monté le tout sur ma carte mère Asus p3b-f ver 1.04 sans modifier les cavaliers de configuration. (ils sont tous règlés en position "par défaut" et "jumper free").J'ai mis à jour le BIOS avec la dernière version Mon problème : Mon PC ne boote plus ! Pas de bip, ecran noir. Pas de démarrage du bios. NB : qd je remets l'ancien processeur à 550 Mhz, le micro redémarre comme il faut ... mais à 550 Mhz. Merci par avance pour votre contribution. Hi Perriot! I have a similar problem. In my Case I would probably need a BIOS Update. Because the Board (P2B 1.02 with a P2/350 - throwout of a BANK) is outfitted with an older BIOS, of course. After a BIOS Update the Cu800EB/133 should work fine, also with 133MHz FSB. All my older P2 CPU´s are sold or built in :-(.... I ought to take my P2Xeon/300 out of the P3B-F and install it in the P2B for making a BIOS Update, to get this 800EB workin, making a nice gamestation with an Océd GeForce DDR 256 (89MHz AGP).... I hope the P2B is stable at 133MHz. Chances are bad. Otherwise, it could be that my P2B is plain broken and no BIOS Update would help. But you could try a smaller Pentium (350, 400, 550) just to see if your Motherboard is working. Start with 100MHz FSB... don´t forget to set the AGP Jumper to 2:3. Or 1:1 with FSB66. Au Revior, Daniel Mandic |
#4
|
|||
|
|||
Pentium3 socket 370 sur Asus P3BF avec adaptateur (slot one-socket 370)
Thank your for your contribution
Manu "Stephan Grossklass" a écrit dans le message de news: ... Perriot-Lebarq schrieb: Bonjour, Je souhaite faire évoluer mon processeur (actuellement un P3 à 550 Mhz en slot one ) par un P3 à 1 Ghz type coppermine avec un FSB de 133 mhz et un voltage core à 1,75V en socket 370. J'ai donc acheté d'occasion un adaptateur socket 370 pour slot one. Pour info, si vious pensez que ca vient de là, il s'agit d'un adaptateur "tout automatique" (pas de jumper). That could be an old PPGA-only adapter for Mendocino Celerons only - and that wouldn't work with your processor, thus your problem. An adapter compatible with Coppermines would have to have at least a "Celeron - Coppermine" jumper, and even then not all of them would be suited: http://support.intel.com/support/pro.../CS-007585.htm You'll probably need another slot adapter suitable for Coppermines. (Tualatin adapters tend to support Coppermines as well, at least the Slot-T does.) Stephan -- Home: http://stephan.win31.de/ PC#6: i440BX, 2xP3-500E, 704 MiB, 250+80 GB, R9k AGP 64 MiB, 110W |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Recommend Good Asus Socket 939 Mobo | 40 PC SOCKET SET | Homebuilt PC's | 7 | February 10th 05 06:57 AM |
ASUS K8V Deluxe - Motherboard | Andre | General | 2 | October 13th 04 01:46 AM |
Asus A8V & Socket 939 | mv | Asus Motherboards | 0 | June 4th 04 05:39 AM |
ASUS P4P800 SE does not power down, at leats not for my outlet with a15W master socket | Fam. Schuurman | Asus Motherboards | 4 | May 17th 04 03:03 AM |
Difference between a 'socket 370' CPU vs a 'slot 1' CPU? | theresa | Homebuilt PC's | 4 | September 20th 03 12:16 PM |