A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Processors » AMD x86-64 Processors
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

x86 or PowerPC for network processing



 
 
Thread Tools Display Modes
  #1  
Old May 30th 12, 10:59 AM posted to alt.comp.hardware.amd.x86-64
Alexander Krizhanovsky
external usenet poster
 
Posts: 3
Default x86 or PowerPC for network processing

Hello,

I'm not sure that I'm posting to the right group - sorry if I'm wrong.

We need to choose hardware platform for our network processing
appliance (common 1-2U server, not an embedded device). Currently
we're going to use only base hardware, without specific hardware like
NPU or FPGA. I have experience with Bivio 7000 platform - high
performance platform for network processing, which is very close to
what we're looking for. Bivio in its solutions uses Freescale MPC7448
processors for application processing units (on which a user can run
his or her custom applications like IDS, HTTP proxy etc).

I had a look at MPC7448 specification: 2 32bit cores, 1.6Ghz, 32KB L1i
and L1d, 1MB L2, 32 general purpose registers and emphasize on
superscalar abilities (4 (3 + branch) instructions per clock). The CPU
costs about $250. Intel Xeon E5606 costs about the same, but has 4
64bit cores, 2.13Ghz, 32KB L1i and L1d, 256KB L2 per core, 8MB L3, 16
general purpose registers.

So why it has sense to use PowerPC processor instead of x86-46 for
high performance network processing? From my point of view double
number of cores and larger caches must beat double number of registers
and maybe better instruction level parallelism (however x86-64 is also
superscalar processor).

The typical workload for our application is memory intensive
operations which requires gigabytes of RAM with large work sets (i.e.
we have relatively low cache hit).
  #2  
Old June 1st 12, 09:29 PM posted to alt.comp.hardware.amd.x86-64
Yousuf Khan[_2_]
external usenet poster
 
Posts: 1,296
Default x86 or PowerPC for network processing

I would say it's using PPC processor because it's likely cheaper. Even
though you listed a price of $250, I'm sure it's available for a lot
cheaper than that for embedded applications.

Yousuf Khan

On 30/05/2012 5:59 AM, Alexander Krizhanovsky wrote:
Hello,

I'm not sure that I'm posting to the right group - sorry if I'm wrong.

We need to choose hardware platform for our network processing
appliance (common 1-2U server, not an embedded device). Currently
we're going to use only base hardware, without specific hardware like
NPU or FPGA. I have experience with Bivio 7000 platform - high
performance platform for network processing, which is very close to
what we're looking for. Bivio in its solutions uses Freescale MPC7448
processors for application processing units (on which a user can run
his or her custom applications like IDS, HTTP proxy etc).

I had a look at MPC7448 specification: 2 32bit cores, 1.6Ghz, 32KB L1i
and L1d, 1MB L2, 32 general purpose registers and emphasize on
superscalar abilities (4 (3 + branch) instructions per clock). The CPU
costs about $250. Intel Xeon E5606 costs about the same, but has 4
64bit cores, 2.13Ghz, 32KB L1i and L1d, 256KB L2 per core, 8MB L3, 16
general purpose registers.

So why it has sense to use PowerPC processor instead of x86-46 for
high performance network processing? From my point of view double
number of cores and larger caches must beat double number of registers
and maybe better instruction level parallelism (however x86-64 is also
superscalar processor).

The typical workload for our application is memory intensive
operations which requires gigabytes of RAM with large work sets (i.e.
we have relatively low cache hit).


  #3  
Old June 1st 12, 11:25 PM posted to alt.comp.hardware.amd.x86-64
Alexander Krizhanovsky
external usenet poster
 
Posts: 3
Default x86 or PowerPC for network processing

On Jun 2, 12:29*am, Yousuf Khan wrote:
I would say it's using PPC processor because it's likely cheaper. Even
though you listed a price of $250, I'm sure it's available for a lot
cheaper than that for embedded applications.


Hi Yousuf,

thanks for the reply.

I took the price from
http://www.freescale.com/webapp/sps/...omSearch=false
, for MC7448VU1600LD model. Also I found AMD Opteron 4280 which costs
about the same ($255), but has 8 64bit cores, 2.8Ghz, 48KB L1i and
L1d, 1MB L2 per core, 8MB shared L3.

However it seems AMD Opteron and Intel Xeon consume much more power.
So probably, performance to power consumption ratio is also the
reason.
  #4  
Old June 2nd 12, 05:26 AM posted to alt.comp.hardware.amd.x86-64
Yousuf Khan[_2_]
external usenet poster
 
Posts: 1,296
Default x86 or PowerPC for network processing

On 01/06/2012 6:25 PM, Alexander Krizhanovsky wrote:
On Jun 2, 12:29 am, Yousuf wrote:
I would say it's using PPC processor because it's likely cheaper. Even
though you listed a price of $250, I'm sure it's available for a lot
cheaper than that for embedded applications.


Hi Yousuf,

thanks for the reply.

I took the price from
http://www.freescale.com/webapp/sps/...omSearch=false
, for MC7448VU1600LD model. Also I found AMD Opteron 4280 which costs
about the same ($255), but has 8 64bit cores, 2.8Ghz, 48KB L1i and
L1d, 1MB L2 per core, 8MB shared L3.

However it seems AMD Opteron and Intel Xeon consume much more power.
So probably, performance to power consumption ratio is also the
reason.


Yup, also a very good reason.

Yousuf Khan
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Udis86 Disassembler for x86 and x86-64 Vivek Mohan AMD x86-64 Processors 0 February 4th 06 11:57 AM
PowerPC 970MP Platform stork General 2 July 26th 05 12:29 PM
PowerPC is the choice for all new consoles BelPowerslave General 3 June 30th 04 07:29 PM
"four or more" IBM PowerPC processors in Xbox 2 R420 General 8 February 6th 04 06:10 AM
PowerPC confirmed for Xbox-2 ? Sprite Scaler General 26 November 11th 03 07:12 PM


All times are GMT +1. The time now is 07:09 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.