If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
On Wed, 18 Feb 2004 18:22:56 +0100, "RICARD Jean"
wrote: Hi I'd like to switch to agp1x i have an abit kg7 with a gf4ti4200 from inno3d under win98se what should i do ? I do not know what you wanna to achieve, but here is the trick if you really wanna do it! (copy/paste those down lines to Notepad, save it & change extension to *.reg & than import it with double click: REGEDIT4 [HKEY_LOCAL_MACHINE\Software\NVIDIA Corporation\System] "EnableIronGate1X"=dword:00000001 (the last line is empty!) .... your texture transfer rate will be limited @ 66MHz Agp clock (default) to 256Mb/sec. if you have problems later, just delete that Dword key ... (similar trick I used when OC-ing my Agp bus to 90MHz on my site...) .... how things can be simple if you know how to ... :-)) -- Regards, SPAJKY ® & visit my site @ http://www.spajky.vze.com "Tualatin OC-ed / BX-Slot1 / inaudible setup!" E-mail AntiSpam: remove ## |
|
Thread Tools | |
Display Modes | |
|
|