If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Hard Disk Activity LED for SATA drives? GA-K8NSNXP-939
Is there a way to get the HD activity LED to work with SATA drives
(using GA-K8NSNXP-939 motherboard)? I have a SATA RAID-0 setup and the LED does not work for these drives. I actually have my DVD-ROM hooked up to the main IDE channel, and the LED light comes on when the it is active. I'd really like to get the LED to work with the hard drives though. I've done some research already, and can't figure out a way to do it. Any help would be appreciated. |
#2
|
|||
|
|||
Weird, the LED works for my GA-8KNXP, rev 2.1
"sycle" wrote in message ... Is there a way to get the HD activity LED to work with SATA drives (using GA-K8NSNXP-939 motherboard)? I have a SATA RAID-0 setup and the LED does not work for these drives. I actually have my DVD-ROM hooked up to the main IDE channel, and the LED light comes on when the it is active. I'd really like to get the LED to work with the hard drives though. I've done some research already, and can't figure out a way to do it. Any help would be appreciated. |
#3
|
|||
|
|||
Are you using your IDE channels at all, or just SATA? I was thinking
maybe I should unplug the optical drive from the IDE channel to see what happens... Weird, the LED works for my GA-8KNXP, rev 2.1 "sycle" wrote in message .. . Is there a way to get the HD activity LED to work with SATA drives (using GA-K8NSNXP-939 motherboard)? I have a SATA RAID-0 setup and the LED does not work for these drives. I actually have my DVD-ROM hooked up to the main IDE channel, and the LED light comes on when the it is active. I'd really like to get the LED to work with the hard drives though. I've done some research already, and can't figure out a way to do it. Any help would be appreciated. |
#4
|
|||
|
|||
It shouldn't make any difference (IDE or SATA, RAID or not).
I suspect it is a bios issue. - Tim "sycle" wrote in message ... Are you using your IDE channels at all, or just SATA? I was thinking maybe I should unplug the optical drive from the IDE channel to see what happens... Weird, the LED works for my GA-8KNXP, rev 2.1 "sycle" wrote in message . .. Is there a way to get the HD activity LED to work with SATA drives (using GA-K8NSNXP-939 motherboard)? I have a SATA RAID-0 setup and the LED does not work for these drives. I actually have my DVD-ROM hooked up to the main IDE channel, and the LED light comes on when the it is active. I'd really like to get the LED to work with the hard drives though. I've done some research already, and can't figure out a way to do it. Any help would be appreciated. |
#5
|
|||
|
|||
Hmm. I have the latest BIOS.
It shouldn't make any difference (IDE or SATA, RAID or not). I suspect it is a bios issue. - Tim "sycle" wrote in message .. . Are you using your IDE channels at all, or just SATA? I was thinking maybe I should unplug the optical drive from the IDE channel to see what happens... Weird, the LED works for my GA-8KNXP, rev 2.1 "sycle" wrote in message ... Is there a way to get the HD activity LED to work with SATA drives (using GA-K8NSNXP-939 motherboard)? I have a SATA RAID-0 setup and the LED does not work for these drives. I actually have my DVD-ROM hooked up to the main IDE channel, and the LED light comes on when the it is active. I'd really like to get the LED to work with the hard drives though. I've done some research already, and can't figure out a way to do it. Any help would be appreciated. |
#6
|
|||
|
|||
"sycle" wrote in message ... Are you using your IDE channels at all, or just SATA? I was thinking maybe I should unplug the optical drive from the IDE channel to see what happens... Weird, the LED works for my GA-8KNXP, rev 2.1 SATA, on the ICH5R. |
#7
|
|||
|
|||
OK. Gigabyte tells me that the LED doesn't work on the nVidia SATA
connections, but it does on the Silicon Image connections. That's odd. I remember reading somewhere that the nVidia SATA is faster, so that's why I chose it. Why do they have two different SATA anyway? It seems strange to me... Weird, the LED works for my GA-8KNXP, rev 2.1 "sycle" wrote in message .. . Is there a way to get the HD activity LED to work with SATA drives (using GA-K8NSNXP-939 motherboard)? I have a SATA RAID-0 setup and the LED does not work for these drives. I actually have my DVD-ROM hooked up to the main IDE channel, and the LED light comes on when the it is active. I'd really like to get the LED to work with the hard drives though. I've done some research already, and can't figure out a way to do it. Any help would be appreciated. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dead hard disk with musical beeps | Arnold | General | 2 | October 31st 04 10:12 AM |
KT7A Problem: Has It Gone Bad and Started Corrupting My Hard Drives? | liu | Abit Motherboards | 1 | October 19th 04 04:26 AM |
Upgrade Report [Hardware Tips: Get the Right Hard Drive - 05/11/2004] | Ablang | General | 0 | May 16th 04 03:17 AM |
Strange files saved the hard disk | SunMyoung Yoon | General | 1 | January 3rd 04 04:44 AM |
newb questions about SCSI hard drives | fred.do | General | 7 | June 26th 03 01:59 AM |