If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
bios hung while flashing
Actually, if you want to hot flash (a "not for the faint of heart" method to
recover a bad flash), you'll need to set the BIOS to cacheable in order to pull the BIOS chip out while it's running. -- Please de-spam my address if replying to me -------------------------------------------- "Adrian Wong" awsh @ rojakpot.com wrote in message ... Hehe... That's why it's advisable NEVER to enable BIOS Cacheable in the BIOS. -- Adrian Wong Adrian's Rojak Pot http://www.rojakpot.com The BIOS Optimization Guide - http://www.rojakpot.com/bog.aspx ARP Forums - http://forums.rojakpot.com/ The ARP Forums - http://forums.rojakpot.com "Blair Wilson" wrote in message ... Thank for the feedback. Issue resolved. I had the bios cacheable in the bios. Once I disabled it, flashing of the bios work without a problem. Blair "Blair Wilson" wrote in message ... HELP NEEDED!! I have Soyo (SY_7VCA-E) motherboard that appears to be hung while flashing the bios. The system is still running. I am using the awdflash program and the latest bios for the board. What can I do now, without destroying my bios? The floppy drive is on and I ahve a blinking cursor. ANY/ALL suggestions are welcomed. Blair |
Thread Tools | |
Display Modes | |
|
|