If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Settings Question for A7N8X
Greetings all,
I just built a new system around the A7N8X DX, Rev. 1003. With a 3000+ Barton and Corsair XMS CL 2.0 512MB (slot 2-3). Here are my settings: CPU Ex. Frequency [166] CPU Multiple Setting [MENU] CPU Multiple [13.0x] System Performance [User Defined] CPU Interface [Aggressive] Memory Frequency [By Spd] Resulting Frequency 200 MHz. Memory Timings [User Defined] Active Precharge Delay [8] RAS to CAS Delay [3] RAS Precharge Delay [3] CAS Latency [2T] I don't want to sacrifice stability but yet I want to get the most out of the hardware I bought. Does this look about right? Should I make any adjustments? It seems stable at the moment but time will tell. It's running about 52C. Does that sound right? Thanks. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CPU Temp and Settings Question | BRH | Overclocking | 4 | January 17th 05 04:13 PM |
Giga-byte=kingmax pc3500 mememory settings problem... | phil | AMD x86-64 Processors | 4 | March 30th 04 06:18 PM |
Question on BIOS settings | MA | Homebuilt PC's | 0 | February 15th 04 07:26 PM |
Help with BIOS settings | Alan | Homebuilt PC's | 4 | January 23rd 04 03:39 AM |
Optimal bios settings? cpu external frequency settings? etc | Mothra | Asus Motherboards | 8 | July 4th 03 04:21 AM |