If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
NVIDIA GeForce4 MX440 AGP8X - Fan ??
I bought a GeForce MX440 with AGP8X approx 6-8 months ago.
When I went to install it, I noticed there was a connection on the PC board for a fan. As there was no fan, I questioned the dealer from who I purchased and was told this model DID NOT have a fan & the connection was there probably for a different model that uses the same PC board. I went ahead & installed it and have had no problems. I have now updated the OS with XP SP2 & after booting I get the following message in a blue box, bottom right of screen "VGA Fan Abnormal, Check VGA Card's Fan". Does this mean that this model SHOULD have a fan? If not, how do I stop this warning message? Thanks to anyone who can answer my questions. Gary |
#2
|
|||
|
|||
On Sun, 23 Jan 2005 11:15:55 GMT, Gary Dingle
wrote: Does this mean that this model SHOULD have a fan? If not, how do I stop this warning message? Nope. Ive bought lots of 400mxes and 420mxes etc and some came with fans and others didnt. Dont know why you have a blue box popping up. MBs do come with monitors for various fans so I guess you have some software installed that warns you about the low rpm of the vga fan - 0 since you have no fan plugged in. If you have lots of problems with freezes etc and you suspect overheating you can buy cheap fans at various places like Compusa. I used to buy their circular heatsink thats blue with a fan in the middle. You can plop that on many video cards if theres room. I ended up using it on a motherboard and it works great after the fan died on it. One thing the thermal tape I used sucked and was the reason it kept freezing even after I put the fan on. Thermal epoxy would probably work better. I used the old trick of super glue in the corners and thermal paste in the middle and it worked great. Id hate to try to pry it off though when the fan dies. |
#3
|
|||
|
|||
"Gary Dingle" wrote in message ... I bought a GeForce MX440 with AGP8X approx 6-8 months ago. When I went to install it, I noticed there was a connection on the PC board for a fan. As there was no fan, I questioned the dealer from who I purchased and was told this model DID NOT have a fan & the connection was there probably for a different model that uses the same PC board. I went ahead & installed it and have had no problems. I have now updated the OS with XP SP2 & after booting I get the following message in a blue box, bottom right of screen "VGA Fan Abnormal, Check VGA Card's Fan". Does this mean that this model SHOULD have a fan? If not, how do I stop this warning message? Thanks to anyone who can answer my questions. Gary there should be a setting for that in your bios... look for a hardware monitor screen (or something similar) then disable vga fan monitoring |
#4
|
|||
|
|||
On Sun, 23 Jan 2005 10:37:58 -0600, "philo" wrote:
"Gary Dingle" wrote in message .. . I bought a GeForce MX440 with AGP8X approx 6-8 months ago. When I went to install it, I noticed there was a connection on the PC board for a fan. As there was no fan, I questioned the dealer from who I purchased and was told this model DID NOT have a fan & the connection was there probably for a different model that uses the same PC board. I went ahead & installed it and have had no problems. I have now updated the OS with XP SP2 & after booting I get the following message in a blue box, bottom right of screen "VGA Fan Abnormal, Check VGA Card's Fan". Does this mean that this model SHOULD have a fan? If not, how do I stop this warning message? Thanks to anyone who can answer my questions. Gary there should be a setting for that in your bios... look for a hardware monitor screen (or something similar) then disable vga fan monitoring My motherboard is a Gigabyte P4 Titan (SiS 645 chipset) there is a section in the bios settings called "PC Helath Status" & in that is the option to enable/disable : CPU Fan Fail Warning and System Fan Fail Warning (which are both disabled) but nowhere can I see reference to VGA or AGP Fan monitoring. I have now emailed the manufacturer, so hopefully a reply from them will fix. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Performance Comparison: Nvidia Fx 5200 or GeForce 4 Ti 4200 | Falcon1209 | General | 13 | October 30th 04 02:26 AM |
USB Scanner doesn´t work after W2kSP4 Update | Psychopather | General | 0 | August 18th 04 12:28 AM |
The nVidia WDM Video Capture (universal) service failed to start | Anonymous | General | 2 | December 28th 03 11:29 PM |
MSI AGP8x Gforce 4 MX440 64 meg Video Card | D_Judge | General | 1 | July 31st 03 01:11 AM |