If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
DVD burner won't write +RW, alll others fine
My new dvd internal multiformat dvd writer(TDK 440n) won't write DVD+RW. I
don't have any problem with other formats like DVD-R and cds. When I try to write to a +RW I get an error message and the disc pops out before anything is burnt to it. I've done the usuall basic things tech support tells you. Upgraded firmware, upgraded software, reinstalled software, tried different brand media. The problem exists nomatter what software I use, and most give similar error messages (which I'll post at the bottom). I am running Win XP home on an AMD Athalon 1.2Ghz, 512 MB RAM. Drive is on its own IDE channel. Thanks for any help. This is driving me crazy. ERROR messages: Ulead DVD MovieFactory ----------------------- Generic error from CD/DVD recording software. Please make sure the drive is ready and try again. Error: DVD+RW-SPTI-04-02-05-20-00 Roxio Disc Copier Version 6.2.0.110 ------------------ F: TDK DVDRW0404n ("Data over-run/uner-run." [0x21000007]) ULONG: Error Number = 21000007 STRING: Error String = Data over-run/under-run. STRING: Vendor Name = TDK STRING: Firmware Revision = 1.06 ULONG: Index of the IWrite drive that reported the error. = 00000000 DATA: Command History - [1st byte: n=cdblen][n bytes:cdb data][1 byte: n=cdblen][n bytes:cdb data].... = ptr:0x01470d30. len:65536 [06 04 11 00 00 00 00 0A 51 00 00 00 00 00 00 00 14 00 0A 23 00 00 00 00 00 00 00 04 00 0A 5A 0 Creator Classic Version 6.1.1.7 ------------------------------- Disc Creation Errors The following error(s) occurred while creating the E80041843: Command error - invalid operation code - (05/20/00) After re-install E80041934: TrackWriter error - Flush failed - (T7127) E80041925: TrackWriter error - Command retry failed - (T7118) Nero ---------------------------------- Drive is in use by other application Sonic Foundry DVD Architect 1.0 ------------------------------------ 'SFMMCX'-(17) 'hpt3xx'-(2) -'TDK DVDRW0404N 1.08'-(0) Module sfmmcx.cpp Line 1158 An illegal request was received. Invalid command code. Status: 00020202 Command: 04 11 00 00 00 00 00 00 00 00 00 00 Sense: 05 20 00 Info: 00 00 00 00 Specific: 00 00 00 Extra: 00 c0 00 00 00 00 01 01 0b 0d IDE BUS Master drivers refernce #162809 |
#2
|
|||
|
|||
Oh also I just tried moving the drive over to a different IDE channel. It
got some better results, but still not working properly. Now some data is written to the disc, but an error always results and the files are incomplete. It also gives me some new error messages which I'll post. Thanks in advance for any suggestions. New errors: Windows - Delayed Write Failed Roxio: --------- E80041927: TrackWriter error - ASPI failure - (T7121) E8004184e: I/O error - communication failure - (04/08/03) E80041925: TrackWriter error - Command retry failed - (T7118) DVD Architect -------------- 'SFMMCX'-(17) 'atapi'-(0) -'TDK DVDRW0404N 1.08'-(1) Module sfmmcx.cpp Line 1648 A hardware error occurred. Unknown Additional Sense 08 03 Status: 00020202 Command: 2a 00 00 00 01 20 00 00 20 00 Sense: 04 08 03 Info: 00 00 00 00 Specific: 00 00 00 Extra: 00 00 00 00 00 00 00 00 00 00 "josh" wrote in message news:1071702602.629760@prawn... My new dvd internal multiformat dvd writer(TDK 440n) won't write DVD+RW. I don't have any problem with other formats like DVD-R and cds. When I try to write to a +RW I get an error message and the disc pops out before anything is burnt to it. I've done the usuall basic things tech support tells you. Upgraded firmware, upgraded software, reinstalled software, tried different brand media. The problem exists nomatter what software I use, and most give similar error messages (which I'll post at the bottom). I am running Win XP home on an AMD Athalon 1.2Ghz, 512 MB RAM. Drive is on its own IDE channel. Thanks for any help. This is driving me crazy. ERROR messages: Ulead DVD MovieFactory ----------------------- Generic error from CD/DVD recording software. Please make sure the drive is ready and try again. Error: DVD+RW-SPTI-04-02-05-20-00 Roxio Disc Copier Version 6.2.0.110 ------------------ F: TDK DVDRW0404n ("Data over-run/uner-run." [0x21000007]) ULONG: Error Number = 21000007 STRING: Error String = Data over-run/under-run. STRING: Vendor Name = TDK STRING: Firmware Revision = 1.06 ULONG: Index of the IWrite drive that reported the error. = 00000000 DATA: Command History - [1st byte: n=cdblen][n bytes:cdb data][1 byte: n=cdblen][n bytes:cdb data].... = ptr:0x01470d30. len:65536 [06 04 11 00 00 00 00 0A 51 00 00 00 00 00 00 00 14 00 0A 23 00 00 00 00 00 00 00 04 00 0A 5A 0 Creator Classic Version 6.1.1.7 ------------------------------- Disc Creation Errors The following error(s) occurred while creating the E80041843: Command error - invalid operation code - (05/20/00) After re-install E80041934: TrackWriter error - Flush failed - (T7127) E80041925: TrackWriter error - Command retry failed - (T7118) Nero ---------------------------------- Drive is in use by other application Sonic Foundry DVD Architect 1.0 ------------------------------------ 'SFMMCX'-(17) 'hpt3xx'-(2) -'TDK DVDRW0404N 1.08'-(0) Module sfmmcx.cpp Line 1158 An illegal request was received. Invalid command code. Status: 00020202 Command: 04 11 00 00 00 00 00 00 00 00 00 00 Sense: 05 20 00 Info: 00 00 00 00 Specific: 00 00 00 Extra: 00 c0 00 00 00 00 01 01 0b 0d IDE BUS Master drivers refernce #162809 |
#3
|
|||
|
|||
On Wed, 17 Dec 2003 23:10:02 GMT, "josh"
wrote:: My new dvd internal multiformat dvd writer(TDK 440n) won't write DVD+RW. I don't have any problem with other formats like DVD-R and cds. When I try to write to a +RW I get an error message and the disc pops out before anything is burnt to it. I've done the usuall basic things tech support tells you. Upgraded firmware, upgraded software, reinstalled software, tried different brand media. The problem exists nomatter what software I use, and most give similar error messages (which I'll post at the bottom). I am running Win XP home on an AMD Athalon 1.2Ghz, 512 MB RAM. Drive is on its own IDE channel. Thanks for any help. This is driving me crazy. SNIP error messages Did you check the master/slave jumper on both drives on the channel? It's one of the things that tech support should walk you through, but you didn't mention. If a drive is alone on a channel, the "usual" behaviour is that it defaults to master, no matter what the jumper says. (The quotes are because it's not standard behaviour, so it's not guaranteed to do this). However, when two drives are on the channel, if both are set the same, you can get all sorts of weird behaviour. Of course, it's also possible that you got a lemon. With all mass produced electronics, the frequency is low, but you do still get the occasional defective one. It's possible you got lucky -- or unlucky, however you want to look at it. Try the drive in another computer, just to be sure it's not some piece of software on the system that's throwing you off. ---------------------------------------- Thanks, MCheu |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question about dvd burner | Rambytes | General | 1 | December 14th 03 12:12 AM |
DVD Burner in 5 Year-old PC | Buck Turgidson | General | 3 | December 6th 03 06:58 PM |
CD & DVD burner on Primary/Secondary Master IDE channel | @drian | General | 2 | November 13th 03 09:59 AM |
Computer won't boot with 2000+ Athlon, 2100+ Athlon works just fine | Cyde Weys | General | 4 | July 3rd 03 12:16 PM |
I'm in the market for a DVD burner ... | Cyde Weys | General | 4 | June 23rd 03 08:51 AM |