XFX Geforce MX440 8X 128mb (version 3.3) - Safe to use in ASROCK K7S8X Mainboard?

Yes, it will work fine, voltage is only higher with AGP 1x cards. What it
is saying is dont exceed 3.3 volts. AGP 2x is 3.3 volt, 4x is 1.5 volts and
8x is 0.75 volts. The original AGP 1.0 (1X) spec was 5 volts.

"richard bates" wrote in message
...
ASROCK K7S8X Motherboard manual gives dire warnings about installing
3.3 volt card, is brand new MX440 at 8X going to be safe?

AGP slot has one long and one short set of connectors.

MX440 has three short sets on connectors.

Advice appreciated.

Thanks, mind set at test - now installed
On Sun, 28 Sep 2003 13:51:12 GMT, "Helion"
wrote:

Yes, it will work fine, voltage is only higher with AGP 1x cards. What it
is saying is dont exceed 3.3 volts. AGP 2x is 3.3 volt, 4x is 1.5 volts and
8x is 0.75 volts. The original AGP 1.0 (1X) spec was 5 volts.

"richard bates" wrote in message
.. .
ASROCK K7S8X Motherboard manual gives dire warnings about installing
3.3 volt card, is brand new MX440 at 8X going to be safe?

AGP slot has one long and one short set of connectors.

MX440 has three short sets on connectors.

Advice appreciated.