celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?

celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?

Or can I expect problems running this celeron on 533 Bus
Did anyone buy this and had problems with IT ?

Or is the speed 2.4x133 =3.20Ghz too high ans should I put
processor on 2.0x133=2.6Ghz

Any experience with it ?

some folks are hitting ~3.2GHz with the P4 celerons, check out the database
at www.overclockers.com ... but of course this is no guarantee that yours
will


"chackie" wrote in message
...
celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?

Or can I expect problems running this celeron on 533 Bus
Did anyone buy this and had problems with IT ?

Or is the speed 2.4x133 =3.20Ghz too high ans should I put
processor on 2.0x133=2.6Ghz

Any experience with it ?

I'd get the 2.2.

22x133 is almost 3Ghz at 133 FSB - you should get 3Ghz safely


"chackie" wrote in message
...
celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?

Or can I expect problems running this celeron on 533 Bus
Did anyone buy this and had problems with IT ?

Or is the speed 2.4x133 =3.20Ghz too high ans should I put
processor on 2.0x133=2.6Ghz

Any experience with it ?

chackie wrote:
celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?

Or can I expect problems running this celeron on 533 Bus
Did anyone buy this and had problems with IT ?

Or is the speed 2.4x133 =3.20Ghz too high ans should I put
processor on 2.0x133=2.6Ghz

Any experience with it ?

Celerons are highly overclockable... But still slow buggers.. I've seen a
test where a Celeron 2.0, overclocked to 3.0, looses in some tests from a P4
1.8...

My advice; try for a cheap low clocked P4, or get one second hand. In the
Netherlands, i can really recommend the second hand shopping... I have
purchased an Intel 875 board with a P4 2.6C for only 225 euro's (about 230
dollars)

Thomas

On Wed, 10 Sep 2003 12:46:33 +0100, "Nick Hogg"
wrote:

some folks are hitting ~3.2GHz with the P4 celerons, check out the database
at www.overclockers.com ... but of course this is no guarantee that yours
will
thanks, already reading and looking for more



"chackie" wrote in message
.. .
celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?

Or can I expect problems running this celeron on 533 Bus
Did anyone buy this and had problems with IT ?

Or is the speed 2.4x133 =3.20Ghz too high ans should I put
processor on 2.0x133=2.6Ghz

Any experience with it ?

On Wed, 10 Sep 2003 17:44:42 +0200, "Thomas"
wrote:

chackie wrote:
celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?

Or can I expect problems running this celeron on 533 Bus
Did anyone buy this and had problems with IT ?

Or is the speed 2.4x133 =3.20Ghz too high ans should I put
processor on 2.0x133=2.6Ghz

Any experience with it ?

Celerons are highly overclockable... But still slow buggers.. I've seen a
test where a Celeron 2.0, overclocked to 3.0, looses in some tests from a P4
1.8...

My advice; try for a cheap low clocked P4, or get one second hand. In the
Netherlands, i can really recommend the second hand shopping... I have
purchased an Intel 875 board with a P4 2.6C for only 225 euro's (about 230
dollars)

Thomas

thats cheap, but a p4 is just out, second hand looks not possible,

waar heb je dat 2e hands setje gekocht ? marktplaats ofzo

chackie wrote:
My advice; try for a cheap low clocked P4, or get one second hand.
In the Netherlands, i can really recommend the second hand
shopping... I have purchased an Intel 875 board with a P4 2.6C for
only 225 euro's (about 230 dollars)

thats cheap, but a p4 is just out, second hand looks not possible,

waar heb je dat 2e hands setje gekocht ? marktplaats ofzo

Processor at marktplaats, board in www.tweakers.net

Thomas.