If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
AIW 9800 Pro and HDTV Wonder at the same time
I have both cards installed with the latest 5.5 drivers. The AIW 9800 PRO is
an AGP board while the HDTV Wonder is in a PCI slot. Catalyst 5.5 drivers. All the software seems to be installed correctly. However, only the TV-Tuner in the AIW 9800 Pro is accepting and displaying any signal. When the analog broadcast antenna (or VCR thru the S-VHS input) is plugged into the AIW 9800 PRO, I get good analog TV or VCR. When the same inputs are put into the HDTV Wonder board nothing is displayed. Of course nothing is displayed in the DTV application either, even with the digital antenna plugged in. It appears that the PC (with XP) only seems to recognize the 9800. Any help would be greatly appreciated. ================================================== ====== Professor Yedidyah Langsam Murray Koppelman Professor & Deputy Chairman Department of Computer & Information Science Brooklyn College 2900 Bedford Avenue Brooklyn, NY 11210 voice: (718) 951-4161 email: ICQ: 10661149 AOL IM: BCCISProf web page: http://eilat.sci.brooklyn.cuny.edu ================================================== ====== |
#2
|
|||
|
|||
"Professor Yedidyah Langsam" wrote in message
news7pqe.179$qr1.34@trndny07... I have both cards installed with the latest 5.5 drivers. The AIW 9800 PRO is an AGP board while the HDTV Wonder is in a PCI slot. Catalyst 5.5 drivers. All the software seems to be installed correctly. However, only the TV-Tuner in the AIW 9800 Pro is accepting and displaying any signal. When the analog broadcast antenna (or VCR thru the S-VHS input) is plugged into the AIW 9800 PRO, I get good analog TV or VCR. When the same inputs are put into the HDTV Wonder board nothing is displayed. Of course nothing is displayed in the DTV application either, even with the digital antenna plugged in. It appears that the PC (with XP) only seems to recognize the 9800. Any help would be greatly appreciated. ================================================== ====== In Device Manager under sound,video and game controllers you should see these ATI devices: ATI DTV Wonder Analog Audio Capture Device ATI DTV Wonder Analog AV Capture Device ATI DTV Wonder Analog AV Crossbar Device ATI DTV Wonder Digital and Analog Tuner Device ATI DTV Wonder Digital BDA Capture Device ATI WDM Rage Theater Audio ATI WDM Rage Theater Video NSP ATI WDM Specialized MVD CoDec ATI WDM Specialized PCD CoDec ATI WDM TV Audio Crossbar ATI WDM TV Tuner If any of the first 5 are missing, have a red X or yellow ! , you need to reinstall the HDTV drivers and reinstall MMC. If they are OK do a repair on MMC. If that doesn't work uninstall and reinstall MMC without retaining any settings. MMC 9.06 and 9.08 didn't install correctly for me the first time but did the second. Earlier versions didn't have that problem. Good Luck |
Thread Tools | |
Display Modes | |
|
|