If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Terrible 6800 perf in 3dmark05
Hi there
I just upgraded to a plain 6800 from a 9800 pro. Upgraded to the latest drivers ran 3dmark03 and got 10000+ points. I`ve red quite a few benches and that seems what i had to expect. I ran 3dmark05 and it was SLOWER than my 9800 pro. I didn`t change anything after running 03. I can`t find any good info about this and it seems like a problem for me, cause i can`t find the reason. My score with 05 is 2650. I think there must be something wrong here. The only thing i can imagine is the amount of mem on the 6800 which is only 128mb. Please help. BYE Jack |
#2
|
|||
|
|||
Your 03 score is a little low, I am getting 11,500 with a P4 2.8 Gig.
Perhaps a clean out of the drivers and update the driver will help here. Have yet to try 05(there is an update by the way), last time I tried to download it it stopped at 143 Meg. I had also upgraded from a 9800Pro and was only getting around the 8,400 mark. I do note that in Doom3 the 6800 is about 50% better than the 9800Pro. "Jack" wrote in message bel.com... Hi there I just upgraded to a plain 6800 from a 9800 pro. Upgraded to the latest drivers ran 3dmark03 and got 10000+ points. I`ve red quite a few benches and that seems what i had to expect. I ran 3dmark05 and it was SLOWER than my 9800 pro. I didn`t change anything after running 03. I can`t find any good info about this and it seems like a problem for me, cause i can`t find the reason. My score with 05 is 2650. I think there must be something wrong here. The only thing i can imagine is the amount of mem on the 6800 which is only 128mb. Please help. BYE Jack |
#3
|
|||
|
|||
using 66.81 forceware I get 16033 on 03 and 3650 on 05 and that's using a
6800 128MB leadtek on an XP3200+ with only 512MB of ram. HTH Robin |
#4
|
|||
|
|||
Sure you are.
"robin.gordon1" wrote in message ... using 66.81 forceware I get 16033 on 03 and 3650 on 05 and that's using a 6800 128MB leadtek on an XP3200+ with only 512MB of ram. HTH Robin |
#5
|
|||
|
|||
That sounds about right since my old 5950 Ultra was getting around 1500 and
my 6800 GT OC was getting around 5000. It makes sense your 6800 128mb would score somewhere in the middle. "robin.gordon1" wrote in message ... using 66.81 forceware I get 16033 on 03 and 3650 on 05 and that's using a 6800 128MB leadtek on an XP3200+ with only 512MB of ram. HTH Robin |
#6
|
|||
|
|||
With my 6800GT and 3.4G P4 with 1G DDR400 on dual channel, I got the
following: 3DMark03 -- 1950 3DMark05 -- 4560 BigVoice On Sun, 24 Oct 2004 08:54:09 GMT, "Pete D" wrote: Your 03 score is a little low, I am getting 11,500 with a P4 2.8 Gig. Perhaps a clean out of the drivers and update the driver will help here. Have yet to try 05(there is an update by the way), last time I tried to download it it stopped at 143 Meg. I had also upgraded from a 9800Pro and was only getting around the 8,400 mark. I do note that in Doom3 the 6800 is about 50% better than the 9800Pro. "Jack" wrote in message abel.com... Hi there I just upgraded to a plain 6800 from a 9800 pro. Upgraded to the latest drivers ran 3dmark03 and got 10000+ points. I`ve red quite a few benches and that seems what i had to expect. I ran 3dmark05 and it was SLOWER than my 9800 pro. I didn`t change anything after running 03. I can`t find any good info about this and it seems like a problem for me, cause i can`t find the reason. My score with 05 is 2650. I think there must be something wrong here. The only thing i can imagine is the amount of mem on the 6800 which is only 128mb. Please help. BYE Jack |
#7
|
|||
|
|||
Some corrections to my sco
3DMark01 -- 19500 3DMark03 -- 11000 3DMark05 -- 4560 All used 66.81 driver. BigVoice On Tue, 26 Oct 2004 22:30:04 +0800, BigVoice wrote: With my 6800GT and 3.4G P4 with 1G DDR400 on dual channel, I got the following: 3DMark03 -- 1950 3DMark05 -- 4560 BigVoice On Sun, 24 Oct 2004 08:54:09 GMT, "Pete D" wrote: Your 03 score is a little low, I am getting 11,500 with a P4 2.8 Gig. Perhaps a clean out of the drivers and update the driver will help here. Have yet to try 05(there is an update by the way), last time I tried to download it it stopped at 143 Meg. I had also upgraded from a 9800Pro and was only getting around the 8,400 mark. I do note that in Doom3 the 6800 is about 50% better than the 9800Pro. "Jack" wrote in message kabel.com... Hi there I just upgraded to a plain 6800 from a 9800 pro. Upgraded to the latest drivers ran 3dmark03 and got 10000+ points. I`ve red quite a few benches and that seems what i had to expect. I ran 3dmark05 and it was SLOWER than my 9800 pro. I didn`t change anything after running 03. I can`t find any good info about this and it seems like a problem for me, cause i can`t find the reason. My score with 05 is 2650. I think there must be something wrong here. The only thing i can imagine is the amount of mem on the 6800 which is only 128mb. Please help. BYE Jack |
#8
|
|||
|
|||
With my 6800GT and AMD Athlon 64 3000 with 61.21 drivers
I got the following 3DMark01 19687 3DMark03 10359 "BigVoice" wrote in message news Some corrections to my sco 3DMark01 -- 19500 3DMark03 -- 11000 3DMark05 -- 4560 All used 66.81 driver. BigVoice On Tue, 26 Oct 2004 22:30:04 +0800, BigVoice wrote: With my 6800GT and 3.4G P4 with 1G DDR400 on dual channel, I got the following: 3DMark03 -- 1950 3DMark05 -- 4560 BigVoice On Sun, 24 Oct 2004 08:54:09 GMT, "Pete D" wrote: Your 03 score is a little low, I am getting 11,500 with a P4 2.8 Gig. Perhaps a clean out of the drivers and update the driver will help here. Have yet to try 05(there is an update by the way), last time I tried to download it it stopped at 143 Meg. I had also upgraded from a 9800Pro and was only getting around the 8,400 mark. I do note that in Doom3 the 6800 is about 50% better than the 9800Pro. "Jack" wrote in message kabel.com... Hi there I just upgraded to a plain 6800 from a 9800 pro. Upgraded to the latest drivers ran 3dmark03 and got 10000+ points. I`ve red quite a few benches and that seems what i had to expect. I ran 3dmark05 and it was SLOWER than my 9800 pro. I didn`t change anything after running 03. I can`t find any good info about this and it seems like a problem for me, cause i can`t find the reason. My score with 05 is 2650. I think there must be something wrong here. The only thing i can imagine is the amount of mem on the 6800 which is only 128mb. Please help. BYE Jack |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NVIDIA GeForce 6800 Ultra port question | Ryan Atici | Nvidia Videocards | 3 | September 14th 04 05:57 AM |
NVidia 6800 Ultra power requirements | John Lewis | Nvidia Videocards | 12 | April 22nd 04 09:53 PM |
NV40 ~ GeForce 6800 specs | NV55 | Ati Videocards | 52 | April 20th 04 11:09 PM |
NV40 ~ GeForce 6800 specs | NV55 | Nvidia Videocards | 51 | April 20th 04 11:09 PM |
NVidia 6800 --- developer comments from Nvidia news release | John Lewis | Nvidia Videocards | 1 | April 17th 04 12:54 AM |