If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
6800 GT Freezing
Hi
I just purchased a Gainward 6800 GT Golden Sample, the card runs as promised. I have noticed one problem though, when exiting DOOM3 or COD my machine freezes. I did not have this problem with the ATI 9600 that I replaced with the Gainward. Has anyone else seen a problem like this? I do not have fast write enabled PC Spec's Abit VT7 VIA PT880 chipset P4 GHz 800fsb HT processor 1 gig DDR 400 memory (4 - 256 chips) 350 power supply Gainward 6800 GT 256 meg Golden Sample Thanks Roland |
#2
|
|||
|
|||
I just purchased a Gainward 6800 GT Golden Sample, the card runs as
promised. I have noticed one problem though, when exiting DOOM3 or COD my machine freezes. I have heard this. The solution involves one of two things: set your 2D & 3D settings to identical clockrates. 2) Update the bios with a newer version. 3) Install the latest doom3 beta patch. Some discussion is at: http://forums.overclockers.co.uk/sho...eadid=17272276 http://www.ocforums.com/showthread.php?t=314079 rms |
#3
|
|||
|
|||
On Thu, 09 Sep 2004 03:41:53 GMT, "rms"
wrote: I just purchased a Gainward 6800 GT Golden Sample, the card runs as promised. I have noticed one problem though, when exiting DOOM3 or COD my machine freezes. I have heard this. The solution involves one of two things: set your 2D & 3D settings to identical clockrates. 2) Update the bios with a newer version. 3) Install the latest doom3 beta patch. Some discussion is at: http://forums.overclockers.co.uk/sho...eadid=17272276 http://www.ocforums.com/showthread.php?t=314079 It's not the bios, it's the latest drivers from Nvidia. I had the exact same problem with a Ti4400... freezing when exiting either Doom 3 or UT2004. Going back to earlier drivers eliminated the problem. I have since upgraded to a 6800 GT which requires the later drivers (no opportunity to revert back) and now the problem is back. So, it's the drivers, not the card. |
#4
|
|||
|
|||
All u need to do is to get the beta 65.73 drivers off guru 3d to fix this,
should be faster as well The whql release of nvidia latest drivers have problems when exiting opengl games/applications. "Folk" wrote in message ... On Thu, 09 Sep 2004 03:41:53 GMT, "rms" wrote: I just purchased a Gainward 6800 GT Golden Sample, the card runs as promised. I have noticed one problem though, when exiting DOOM3 or COD my machine freezes. I have heard this. The solution involves one of two things: set your 2D & 3D settings to identical clockrates. 2) Update the bios with a newer version. 3) Install the latest doom3 beta patch. Some discussion is at: http://forums.overclockers.co.uk/sho...eadid=17272276 http://www.ocforums.com/showthread.php?t=314079 It's not the bios, it's the latest drivers from Nvidia. I had the exact same problem with a Ti4400... freezing when exiting either Doom 3 or UT2004. Going back to earlier drivers eliminated the problem. I have since upgraded to a 6800 GT which requires the later drivers (no opportunity to revert back) and now the problem is back. So, it's the drivers, not the card. |
#5
|
|||
|
|||
On Thu, 9 Sep 2004 19:27:24 +0100, "John" wrote:
All u need to do is to get the beta 65.73 drivers off guru 3d to fix this, should be faster as well The whql release of nvidia latest drivers have problems when exiting opengl games/applications. That's good to hear... I was hoping that a later release driver would fix the problem. It's not a show-stopper for me, so I'll probably wait until the next official release. Besides, it seems that every time I install a beta driver, they release an official one within the week. G "Folk" wrote in message .. . On Thu, 09 Sep 2004 03:41:53 GMT, "rms" wrote: I just purchased a Gainward 6800 GT Golden Sample, the card runs as promised. I have noticed one problem though, when exiting DOOM3 or COD my machine freezes. I have heard this. The solution involves one of two things: set your 2D & 3D settings to identical clockrates. 2) Update the bios with a newer version. 3) Install the latest doom3 beta patch. Some discussion is at: http://forums.overclockers.co.uk/sho...eadid=17272276 http://www.ocforums.com/showthread.php?t=314079 It's not the bios, it's the latest drivers from Nvidia. I had the exact same problem with a Ti4400... freezing when exiting either Doom 3 or UT2004. Going back to earlier drivers eliminated the problem. I have since upgraded to a 6800 GT which requires the later drivers (no opportunity to revert back) and now the problem is back. So, it's the drivers, not the card. |
#6
|
|||
|
|||
"Folk" wrote in message ... On Thu, 09 Sep 2004 03:41:53 GMT, "rms" wrote: I just purchased a Gainward 6800 GT Golden Sample, the card runs as promised. I have noticed one problem though, when exiting DOOM3 or COD my machine freezes. I have heard this. The solution involves one of two things: set your 2D & 3D settings to identical clockrates. 2) Update the bios with a newer version. 3) Install the latest doom3 beta patch. Some discussion is at: http://forums.overclockers.co.uk/sho...eadid=17272276 http://www.ocforums.com/showthread.php?t=314079 It's not the bios, it's the latest drivers from Nvidia. I had the exact same problem with a Ti4400... freezing when exiting either Doom 3 or UT2004. Going back to earlier drivers eliminated the problem. I have since upgraded to a 6800 GT which requires the later drivers (no opportunity to revert back) and now the problem is back. So, it's the drivers, not the card. Thanks for the lead, I downloaded the drivers. this fixed the problem... Thanks Roland |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NVidia 6800 Ultra power requirements | John Lewis | Nvidia Videocards | 12 | April 22nd 04 09:53 PM |
NV40 ~ GeForce 6800 specs | NV55 | Ati Videocards | 52 | April 20th 04 11:09 PM |
NV40 ~ GeForce 6800 specs | NV55 | Nvidia Videocards | 51 | April 20th 04 11:09 PM |
John Carmack's official comments on NV40 (GeForce 6800 family) | John Lewis | Ati Videocards | 45 | April 18th 04 06:06 PM |
NVidia 6800 --- developer comments from Nvidia news release | John Lewis | Nvidia Videocards | 1 | April 17th 04 12:54 AM |