A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Video Cards » Nvidia Videocards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Ti4200 memory clock



 
 
Thread Tools Display Modes
  #1  
Old February 18th 04, 10:51 AM
fred
external usenet poster
 
Posts: n/a
Default Ti4200 memory clock

I have a Club3d Ti4200 and the display properties say:
Core clock 250 and Memory clock 332MHz.
Sliding step by step to 260/380 freezes the system.
I see everywhere 250/444 or 250/500 as default. Do I have very bad card ?
  #2  
Old February 18th 04, 07:03 PM
BigJIm
external usenet poster
 
Posts: n/a
Default

these cards have two different memory types, regular memory and gold sample. the gold samples are overclockable. The gold samples are more expensive. It has faster memory.
"fred" wrote in message . nl...
I have a Club3d Ti4200 and the display properties say:
Core clock 250 and Memory clock 332MHz.
Sliding step by step to 260/380 freezes the system.
I see everywhere 250/444 or 250/500 as default. Do I have very bad card ?
  #3  
Old February 18th 04, 07:07 PM
raj
external usenet poster
 
Posts: n/a
Default

it probally is a slow memery card, i have a geforce 4 ti 4200 from asus its 128ddr and the last 2 number on the ram tell you the timing's mine is 3.6 and it can go up to 550 memery no prblem but it's deflaut is 500, cehck your chips on the card and see waht the last 2 numbers are.
"fred" wrote in message . nl...
I have a Club3d Ti4200 and the display properties say:
Core clock 250 and Memory clock 332MHz.
Sliding step by step to 260/380 freezes the system.
I see everywhere 250/444 or 250/500 as default. Do I have very bad card ?
  #4  
Old February 18th 04, 08:24 PM
John Lewis
external usenet poster
 
Posts: n/a
Default

On Wed, 18 Feb 2004 10:51:59 +0100, "fred"
wrote:

This is a multi-part message in MIME format.

------=_NextPart_000_0065_01C3F60D.3BBCE9F0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I have a Club3d Ti4200 and the display properties say:
Core clock 250 and Memory clock 332MHz.=20
Sliding step by step to 260/380 freezes the system.
I see everywhere 250/444 or 250/500 as default. Do I have very bad card =
?
------=_NextPart_000_0065_01C3F60D.3BBCE9F0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1"
META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR
STYLE/STYLE
/HEAD
BODY bgColor=3D#ffffff
DIVFONT face=3DArial size=3D2I have a Club3d Ti4200 and the display =
properties=20
say:/FONT/DIV
DIVFONT face=3DArial size=3D2Core clock 250 and Memory clock 332MHz. =

/FONT/DIV
DIVFONT face=3DArial size=3D2Sliding step by step to 260/380 =
freezes the=20
system./FONT/DIV
DIVFONT face=3DArial size=3D2I see everywhere 250/444 or 250/500 as=20
default.  /FONTFONT face=3DArial size=3D2Do I have very bad =
card=20
?/FONT/DIV/BODY/HTML

------=_NextPart_000_0065_01C3F60D.3BBCE9F0--



A gentle suggestion:-

Next time you post, it might be just a little better if you posted in
clear-text, instead of MIME.... Less consumption of Internet bandwidth
with spurious characters and more readable for the 99% others who do
respect that bandwidth and exclusively use clear-text newsreaders
(or clear-text settings) when reading/posting-to a newsgroup.

John Lewis
  #5  
Old February 19th 04, 12:56 PM
fred
external usenet poster
 
Posts: n/a
Default

Thank you for reminding me.
Should be alright by now. (I hope)

"John Lewis" wrote in message
...
On Wed, 18 Feb 2004 10:51:59 +0100, "fred"
wrote:

This is a multi-part message in MIME format.

------=_NextPart_000_0065_01C3F60D.3BBCE9F0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I have a Club3d Ti4200 and the display properties say:
Core clock 250 and Memory clock 332MHz.=20
Sliding step by step to 260/380 freezes the system.
I see everywhere 250/444 or 250/500 as default. Do I have very bad card

=
?
------=_NextPart_000_0065_01C3F60D.3BBCE9F0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1"
META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR
STYLE/STYLE
/HEAD
BODY bgColor=3D#ffffff
DIVFONT face=3DArial size=3D2I have a Club3d Ti4200 and the display =
properties=20
say:/FONT/DIV
DIVFONT face=3DArial size=3D2Core clock 250 and Memory clock 332MHz.

=

/FONT/DIV
DIVFONT face=3DArial size=3D2Sliding step by step to 260/380 =
freezes the=20
system./FONT/DIV
DIVFONT face=3DArial size=3D2I see everywhere 250/444 or 250/500

as=20
default.  /FONTFONT face=3DArial size=3D2Do I have very bad =
card=20
?/FONT/DIV/BODY/HTML

------=_NextPart_000_0065_01C3F60D.3BBCE9F0--



A gentle suggestion:-

Next time you post, it might be just a little better if you posted in
clear-text, instead of MIME.... Less consumption of Internet bandwidth
with spurious characters and more readable for the 99% others who do
respect that bandwidth and exclusively use clear-text newsreaders
(or clear-text settings) when reading/posting-to a newsgroup.

John Lewis


  #6  
Old February 20th 04, 04:05 AM
llamaboiz
external usenet poster
 
Posts: n/a
Default

geh... 250/332... hmm... i have a MSI G4Ti4200 128mb VTD8X and it came
250/540 stock, im running at 291/595 (stable) with x-tra cooling (pci
exhaust blower over gpu fan + 3out/2in 80mm case fans)... 45.32 drivers


"fred" wrote in message
.nl...
Thank you for reminding me.
Should be alright by now. (I hope)

"John Lewis" wrote in message
...
On Wed, 18 Feb 2004 10:51:59 +0100, "fred"
wrote:

This is a multi-part message in MIME format.

------=_NextPart_000_0065_01C3F60D.3BBCE9F0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I have a Club3d Ti4200 and the display properties say:
Core clock 250 and Memory clock 332MHz.=20
Sliding step by step to 260/380 freezes the system.
I see everywhere 250/444 or 250/500 as default. Do I have very bad

card
=
?
------=_NextPart_000_0065_01C3F60D.3BBCE9F0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1"
META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR
STYLE/STYLE
/HEAD
BODY bgColor=3D#ffffff
DIVFONT face=3DArial size=3D2I have a Club3d Ti4200 and the display

=
properties=20
say:/FONT/DIV
DIVFONT face=3DArial size=3D2Core clock 250 and Memory clock

332MHz.
=

/FONT/DIV
DIVFONT face=3DArial size=3D2Sliding step by step to 260/380 =
freezes the=20
system./FONT/DIV
DIVFONT face=3DArial size=3D2I see everywhere 250/444 or 250/500

as=20
default.  /FONTFONT face=3DArial size=3D2Do I have very bad =
card=20
?/FONT/DIV/BODY/HTML

------=_NextPart_000_0065_01C3F60D.3BBCE9F0--



A gentle suggestion:-

Next time you post, it might be just a little better if you posted in
clear-text, instead of MIME.... Less consumption of Internet bandwidth
with spurious characters and more readable for the 99% others who do
respect that bandwidth and exclusively use clear-text newsreaders
(or clear-text settings) when reading/posting-to a newsgroup.

John Lewis




  #7  
Old February 20th 04, 10:22 AM
fred
external usenet poster
 
Posts: n/a
Default

I can't find the Club3D specs of Ti4200 card anywhere on the web.
On Club-3d website the cards specs have gone.
These things (250/332) are not on the box or told when buying it last year.
But I see nowhere on Ti4200 such a low memory spec. It is crap.

"llamaboiz" wrote in message
...
geh... 250/332... hmm... i have a MSI G4Ti4200 128mb VTD8X and it came
250/540 stock, im running at 291/595 (stable) with x-tra cooling (pci
exhaust blower over gpu fan + 3out/2in 80mm case fans)... 45.32 drivers


"fred" wrote in message
.nl...
Thank you for reminding me.
Should be alright by now. (I hope)

"John Lewis" wrote in message
...
On Wed, 18 Feb 2004 10:51:59 +0100, "fred"
wrote:

This is a multi-part message in MIME format.

------=_NextPart_000_0065_01C3F60D.3BBCE9F0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I have a Club3d Ti4200 and the display properties say:
Core clock 250 and Memory clock 332MHz.=20
Sliding step by step to 260/380 freezes the system.
I see everywhere 250/444 or 250/500 as default. Do I have very bad

card
=
?
------=_NextPart_000_0065_01C3F60D.3BBCE9F0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1"
META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR
STYLE/STYLE
/HEAD
BODY bgColor=3D#ffffff
DIVFONT face=3DArial size=3D2I have a Club3d Ti4200 and the

display
=
properties=20
say:/FONT/DIV
DIVFONT face=3DArial size=3D2Core clock 250 and Memory clock

332MHz.
=

/FONT/DIV
DIVFONT face=3DArial size=3D2Sliding step by step to 260/380

=
freezes the=20
system./FONT/DIV
DIVFONT face=3DArial size=3D2I see everywhere 250/444 or 250/500

as=20
default.  /FONTFONT face=3DArial size=3D2Do I have very bad

=
card=20
?/FONT/DIV/BODY/HTML

------=_NextPart_000_0065_01C3F60D.3BBCE9F0--



A gentle suggestion:-

Next time you post, it might be just a little better if you posted in
clear-text, instead of MIME.... Less consumption of Internet bandwidth
with spurious characters and more readable for the 99% others who do
respect that bandwidth and exclusively use clear-text newsreaders
(or clear-text settings) when reading/posting-to a newsgroup.

John Lewis





 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
On the brink of madness... I.C. Koets General 18 January 31st 05 11:49 PM
PC2100 versus PC2700 Marc Guyott Asus Motherboards 3 January 20th 05 03:32 AM
P4C800-E Deluxe - CPU speed vs Timming vs Memory speed? Paul Asus Motherboards 0 February 7th 04 05:59 PM
Memory sticks P4C800E-DeLuxe Barend Asus Motherboards 3 December 21st 03 04:24 PM
memory timings p4p800 robert Asus Motherboards 3 November 10th 03 06:18 AM


All times are GMT +1. The time now is 03:57 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.