If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
9800 pro reinstall issue with w2000
Hi,
I am under W2000 , with a 9800 pro radeon. Before , this card was working , no problem with omega 4.8.442 and FarCry. Now it doesn't work , I'm in VGA mode: http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg I can't install again a decent driver , I get error mesage with omega and os or video card not supported with ati drivers. Direct3d gives an error message with dxdiag. What can I do? Thank you. -- Emmanuel http://ebgy.ath.cx |
#2
|
|||
|
|||
9800 pro reinstall issue with w2000
"Emmanuel" wrote in message ...
Hi, I am under W2000 , with a 9800 pro radeon. Before , this card was working , no problem with omega 4.8.442 and FarCry. Now it doesn't work , I'm in VGA mode: http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg I can't install again a decent driver , I get error mesage with omega and os or video card not supported with ati drivers. Direct3d gives an error message with dxdiag. What can I do? Thank you. -- Emmanuel http://ebgy.ath.cx Try booting in Safe Mode, and run ATI's uninstall utility (from their website). Then install an older Catalyst version (one that specifically supports Win2K). If that goes ok, then try updating the driver. If nothing else works, you can try reinstalling SP4 and/or DirectX 9.0c. |
#3
|
|||
|
|||
9800 pro reinstall issue with w2000
"Emmanuel" wrote in message
... Hi, I am under W2000 , with a 9800 pro radeon. Before , this card was working , no problem with omega 4.8.442 and FarCry. Now it doesn't work , I'm in VGA mode: http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg I can't install again a decent driver , I get error mesage with omega and os or video card not supported with ati drivers. Direct3d gives an error message with dxdiag. What can I do? Thank you. -- Emmanuel http://ebgy.ath.cx Try booting in Safe Mode, and run ATI's uninstall utility (from their website). Then install an older Catalyst version (one that specifically supports Win2K). If that goes ok, then try updating the driver. If nothing else works, you can try reinstalling SP4 and/or DirectX 9.0c. I did it. Delete everything ati labelled in safe mode Install 6.2 catalyst from ati driver Delete everything ati labelled in safe mode Install last omega driver 4.8.442 Install directx9c of March 08 Install SP4 Now everything seems Ok , except I always get this message by right clicking on the desktop http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg What can I do? -- Emmanuel http://tigerfr.free.fr '97 Tiger '98 KLX300R |
#4
|
|||
|
|||
9800 pro reinstall issue with w2000
"Emmanuel" wrote in message
... Hi, I am under W2000 , with a 9800 pro radeon. Before , this card was working , no problem with omega 4.8.442 and FarCry. Now it doesn't work , I'm in VGA mode: http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg I can't install again a decent driver , I get error mesage with omega and os or video card not supported with ati drivers. Direct3d gives an error message with dxdiag. What can I do? Thank you. -- Emmanuel http://ebgy.ath.cx Try booting in Safe Mode, and run ATI's uninstall utility (from their website). Then install an older Catalyst version (one that specifically supports Win2K). If that goes ok, then try updating the driver. If nothing else works, you can try reinstalling SP4 and/or DirectX 9.0c. I did it. Delete everything ati labelled in safe mode Install 6.2 catalyst from ati driver Delete everything ati labelled in safe mode Install last omega driver 4.8.442 Install directx9c of March 08 Install SP4 Now everything seems Ok , except I always get this message by right clicking on the desktop http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg What can I do? I boot in reduced (F8) mode in win2000 I go to thr control panel/system. I choose to go to the video driver place.It's the VGA one. I stopped it and configure it to auto. I boot and it's OK. Thank you for help. -- Emmanuel http://ebgy.ath.cx |
#5
|
|||
|
|||
9800 pro reinstall issue with w2000
"Emmanuel" wrote in message ...
"Emmanuel" wrote in message ... Hi, I am under W2000 , with a 9800 pro radeon. Before , this card was working , no problem with omega 4.8.442 and FarCry. Now it doesn't work , I'm in VGA mode: http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg I can't install again a decent driver , I get error mesage with omega and os or video card not supported with ati drivers. Direct3d gives an error message with dxdiag. What can I do? Thank you. -- Emmanuel http://ebgy.ath.cx Try booting in Safe Mode, and run ATI's uninstall utility (from their website). Then install an older Catalyst version (one that specifically supports Win2K). If that goes ok, then try updating the driver. If nothing else works, you can try reinstalling SP4 and/or DirectX 9.0c. I did it. Delete everything ati labelled in safe mode Install 6.2 catalyst from ati driver Delete everything ati labelled in safe mode Install last omega driver 4.8.442 Install directx9c of March 08 Install SP4 Now everything seems Ok , except I always get this message by right clicking on the desktop http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg What can I do? I boot in reduced (F8) mode in win2000 I go to thr control panel/system. I choose to go to the video driver place.It's the VGA one. I stopped it and configure it to auto. I boot and it's OK. Thank you for help. Good to hear you got it working. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
9800 Pro - Halo issue | PTA | Ati Videocards | 0 | December 27th 06 03:06 PM |
AIW 9800 recorded TV sound issue | Louie | Ati Videocards | 3 | January 4th 06 10:29 AM |
9800 S-Video vs Composite quality issue | Tony DiMarzio | Ati Videocards | 4 | October 20th 03 06:21 AM |
AIW 9800 Pro overvoltage issue? | tempName | Ati Videocards | 2 | September 21st 03 10:11 PM |
875P/radeon 9800/agp8x issue | Lefty | Overclocking | 3 | August 7th 03 11:27 AM |