If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Can't install EN8400GS Silent
Hey guys I'm trying to install the Asus EN8400GS Silent on my Asus M2N-MXSE
PLUS board but it doesn't seem to work properly winxp pro detects the card no problem installs the drivers but I have a max resolution of 640x480 at 4bit colour depth and it won't go any higher if I take the card out and use the integrated graphics on the motherboard everything works fine. Please help |
#2
|
|||
|
|||
Can't install EN8400GS Silent
"Shane" wrote in message ... Hey guys I'm trying to install the Asus EN8400GS Silent on my Asus M2N-MXSE PLUS board but it doesn't seem to work properly winxp pro detects the card no problem installs the drivers but I have a max resolution of 640x480 at 4bit colour depth and it won't go any higher if I take the card out and use the integrated graphics on the motherboard everything works fine. Please help WinXP Pro installs the drivers....but not the ones you want. Download the latest Forceware drivers for your card and OS to your desktop or wherever you like but do not install. Shut the system down. Install the card properly. Power on and allow windows to discover the card. When the hardware wizard comes up hit cancel. Now run the Forceware executable and install the drivers. Reboot. Should be properly installed and all supported resolutions available. |
#3
|
|||
|
|||
Can't install EN8400GS Silent
I shall try these steps but that seems exactly what I have done I shall
double check because wimp pro knows it's there it's the resolution and colour depth is the problem so it would seem to me that it is either the process I installed the card and drivers which confused wimp pro, shall reply late tomorrow. "Augustus" wrote in message news:G1OLk.3191$%%2.360@edtnps82... "Shane" wrote in message ... Hey guys I'm trying to install the Asus EN8400GS Silent on my Asus M2N-MXSE PLUS board but it doesn't seem to work properly winxp pro detects the card no problem installs the drivers but I have a max resolution of 640x480 at 4bit colour depth and it won't go any higher if I take the card out and use the integrated graphics on the motherboard everything works fine. Please help WinXP Pro installs the drivers....but not the ones you want. Download the latest Forceware drivers for your card and OS to your desktop or wherever you like but do not install. Shut the system down. Install the card properly. Power on and allow windows to discover the card. When the hardware wizard comes up hit cancel. Now run the Forceware executable and install the drivers. Reboot. Should be properly installed and all supported resolutions available. |
#4
|
|||
|
|||
Can't install EN8400GS Silent
'Shane' wrote:
I shall try these steps but that seems exactly what I have done I shall double check because wimp pro knows it's there it's the resolution and colour depth is the problem so it would seem to me that it is either the process I installed the card and drivers which confused wimp pro, shall reply late tomorrow. _____ 'ja disable the on-motherboard display adapter? Phil Weldon "Shane" wrote in message ... I shall try these steps but that seems exactly what I have done I shall double check because wimp pro knows it's there it's the resolution and colour depth is the problem so it would seem to me that it is either the process I installed the card and drivers which confused wimp pro, shall reply late tomorrow. "Augustus" wrote in message news:G1OLk.3191$%%2.360@edtnps82... "Shane" wrote in message ... Hey guys I'm trying to install the Asus EN8400GS Silent on my Asus M2N-MXSE PLUS board but it doesn't seem to work properly winxp pro detects the card no problem installs the drivers but I have a max resolution of 640x480 at 4bit colour depth and it won't go any higher if I take the card out and use the integrated graphics on the motherboard everything works fine. Please help WinXP Pro installs the drivers....but not the ones you want. Download the latest Forceware drivers for your card and OS to your desktop or wherever you like but do not install. Shut the system down. Install the card properly. Power on and allow windows to discover the card. When the hardware wizard comes up hit cancel. Now run the Forceware executable and install the drivers. Reboot. Should be properly installed and all supported resolutions available. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Can't install EN8400GS Silent | Shane[_2_] | Asus Motherboards | 4 | October 25th 08 11:59 AM |
Intel Embedded Graphic Driver silent install | Hans Skytt Steffensen | Intel | 1 | October 4th 08 12:59 AM |
Silent PSU | Maus | Asus Motherboards | 2 | March 13th 06 10:18 PM |
MMc installation trick. 1. install driver for the video card "vivo, aiw" reboot" 2. install ati dvd decoder. reboot 3. install mmc for all the thing that come with your videocard. buttom line. | DDC | Ati Videocards | 7 | August 4th 05 08:20 AM |
Silent un install of ati driver and product | cpoforum | Ati Videocards | 2 | October 14th 04 12:07 PM |