If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Compatibility
We just bought a 21" Gateway FPD2185W Monitor ... recommended
resolution 1680x1050 It doesn't get on well with our current Graphics card, so we are looking at getting a new one. I was looking at the Matrox Millennium P650 Video Card, but I am not sure whether it would be compatible with our current system. The Matrox Millennium P650 Video Card has the following minimum system requirements: System: AGP 3.0 compliant 128 MB RAM 600 MHz CPU Microsoft® Windows® 2000, Windows® XP, or Linux We have an AOpen AX34 Pentium III FC-PGA 133MHz 4x AGP ATX MotherBoard I assume we would have to replace it? As far as computer knowledge goes, I am a caveman with a silicon club, so go easy on me. We do not really want the added expense of replacing the motherboard, nor the fuss of an internet return should the GPU not work for some other reason (none of the local shops carry Matrox). No one in the house is a gamer, we use the computer for websurfing, and graphic art (Photoshop & an art tablet). The local computer shop suggested the MX4000 as an inexpensive alternative... I assume they meant the GeForce MX4000. As we only have a single monitor setup, is it worth the bother to go for the Matrox.... how will the GeForce fare for my graphic art applications? Are there any computer components I have to worry about besides the Motherboard concerning compatibility? |
#2
|
|||
|
|||
Compatibility
On 16 Aug 2006 17:01:12 -0700, "Canid" wrote:
We just bought a 21" Gateway FPD2185W Monitor ... recommended resolution 1680x1050 It doesn't get on well with our current Graphics card, so we are looking at getting a new one. I was looking at the Matrox Millennium P650 Video Card, but I am not sure whether it would be compatible with our current system. The Matrox Millennium P650 Video Card has the following minimum system requirements: System: AGP 3.0 compliant 128 MB RAM 600 MHz CPU Microsoft® Windows® 2000, Windows® XP, or Linux We have an AOpen AX34 Pentium III FC-PGA 133MHz 4x AGP ATX MotherBoard I assume we would have to replace it? That depends on what OS you're running ( W98, W2000, XP etc ) and on what CPU you have installed. If you're uncertain as to the CPU, look at the bios screen at startup - it should tell you what speed your CPU is. Your board is quite old, but capable of supporting PIII cpus up to 1Ghz. As far as computer knowledge goes, I am a caveman with a silicon club, so go easy on me. We do not really want the added expense of replacing the motherboard, nor the fuss of an internet return should the GPU not work for some other reason (none of the local shops carry Matrox). No one in the house is a gamer, we use the computer for websurfing, and graphic art (Photoshop & an art tablet). The local computer shop suggested the MX4000 as an inexpensive alternative... I assume they meant the GeForce MX4000. As we only have a single monitor setup, is it worth the bother to go for the Matrox.... how will the GeForce fare for my graphic art applications? The Matrox is a nice bit of kit, but its appeal lies in its dual monitor capabilities - and if you don't need or want them then it's a bit of a waste. The GeForce will be fine for your needs - though check that the output socket from your new graphics card matches the input of the monitor. To be honest, if you're not that savvy with computers I'd recommend you stick with your local computer shop rather than scouring the web. Might cost you a few quid more but at least you'll stand a better chance of getting the right kit - and have somewhere to go if there are any problems. Regards, -- Stephen Howard - Woodwind repairs & period restorations www.shwoodwind.co.uk Emails to: showard{whoisat}shwoodwind{dot}co{dot}uk |
#3
|
|||
|
|||
Compatibility
How much difference is there in picture quallity, colour and clarity
between the Matrox and the GeForce then? As I understood it, the Matrox cards had a very good reputation there. Stephen Howard wrote: On 16 Aug 2006 17:01:12 -0700, "Canid" wrote: We just bought a 21" Gateway FPD2185W Monitor ... recommended resolution 1680x1050 It doesn't get on well with our current Graphics card, so we are looking at getting a new one. I was looking at the Matrox Millennium P650 Video Card, but I am not sure whether it would be compatible with our current system. The Matrox Millennium P650 Video Card has the following minimum system requirements: System: AGP 3.0 compliant 128 MB RAM 600 MHz CPU Microsoft® Windows® 2000, Windows® XP, or Linux We have an AOpen AX34 Pentium III FC-PGA 133MHz 4x AGP ATX MotherBoard I assume we would have to replace it? That depends on what OS you're running ( W98, W2000, XP etc ) and on what CPU you have installed. If you're uncertain as to the CPU, look at the bios screen at startup - it should tell you what speed your CPU is. Your board is quite old, but capable of supporting PIII cpus up to 1Ghz. As far as computer knowledge goes, I am a caveman with a silicon club, so go easy on me. We do not really want the added expense of replacing the motherboard, nor the fuss of an internet return should the GPU not work for some other reason (none of the local shops carry Matrox). No one in the house is a gamer, we use the computer for websurfing, and graphic art (Photoshop & an art tablet). The local computer shop suggested the MX4000 as an inexpensive alternative... I assume they meant the GeForce MX4000. As we only have a single monitor setup, is it worth the bother to go for the Matrox.... how will the GeForce fare for my graphic art applications? The Matrox is a nice bit of kit, but its appeal lies in its dual monitor capabilities - and if you don't need or want them then it's a bit of a waste. The GeForce will be fine for your needs - though check that the output socket from your new graphics card matches the input of the monitor. To be honest, if you're not that savvy with computers I'd recommend you stick with your local computer shop rather than scouring the web. Might cost you a few quid more but at least you'll stand a better chance of getting the right kit - and have somewhere to go if there are any problems. Regards, -- Stephen Howard - Woodwind repairs & period restorations www.shwoodwind.co.uk Emails to: showard{whoisat}shwoodwind{dot}co{dot}uk |
#4
|
|||
|
|||
Compatibility
Main Processor: Pentium III 866MHz
Operating System: Windows XP Professional |
#5
|
|||
|
|||
Compatibility
On 17 Aug 2006 04:46:12 -0700, "Canid" wrote:
How much difference is there in picture quallity, colour and clarity between the Matrox and the GeForce then? As I understood it, the Matrox cards had a very good reputation there. It used to be that the difference was quite clear - but then the competition wasn't all that hot. Different story these days - plus you have to factor in improvements in monitor design. For example - I have a Matrox G450 running on Philips monitor and an NVidia MX440 running on a Compaq monitor..and I get a better picture on the Compaq. You CPU and OS will take the Matrox should you wish to go down that path, but you'd be paying a lot for features you wouldn't be using. Regards, -- Stephen Howard - Woodwind repairs & period restorations www.shwoodwind.co.uk Emails to: showard{whoisat}shwoodwind{dot}co{dot}uk |
#6
|
|||
|
|||
Compatibility
Thank-you very much. You've been a great help.
Stephen Howard wrote: On 17 Aug 2006 04:46:12 -0700, "Canid" wrote: How much difference is there in picture quallity, colour and clarity between the Matrox and the GeForce then? As I understood it, the Matrox cards had a very good reputation there. It used to be that the difference was quite clear - but then the competition wasn't all that hot. Different story these days - plus you have to factor in improvements in monitor design. For example - I have a Matrox G450 running on Philips monitor and an NVidia MX440 running on a Compaq monitor..and I get a better picture on the Compaq. You CPU and OS will take the Matrox should you wish to go down that path, but you'd be paying a lot for features you wouldn't be using. Regards, -- Stephen Howard - Woodwind repairs & period restorations www.shwoodwind.co.uk Emails to: showard{whoisat}shwoodwind{dot}co{dot}uk |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Subject: Hitachi travelstar and compaq presario laptop r3000z HD compatibility problems....?? | [email protected] | Storage (alternative) | 0 | December 6th 05 12:30 AM |
suggestions, opinions, compatibility issues... all wanted here | Sam Stone | Homebuilt PC's | 13 | January 29th 05 03:12 PM |
MS-DOS Compatibility Mode | Scott | Gateway Computers | 2 | February 13th 04 01:08 AM |
NFTS compatibility with Mac OS X, Linux, OpenBSD? | Matt | Storage & Hardrives | 1 | January 13th 04 04:48 PM |
7240 MS-DOS Compatibility Mode | Bob | Compaq Computers | 1 | July 23rd 03 05:43 AM |