A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Video Cards » Nvidia Videocards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

will gf1 DDR work fine with Cel 433 on LX chipset?



 
 
Thread Tools Display Modes
  #1  
Old July 17th 03, 02:16 PM
Markus
external usenet poster
 
Posts: n/a
Default will gf1 DDR work fine with Cel 433 on LX chipset?

i have some old parts around and want to put them together. so what can i
expect with a gf1 DDR and a Cel 433? board will have an LX chipset.
what can i expect, e.g. for halflife oder q3?

thx
Markus


  #2  
Old July 17th 03, 05:09 PM
Ali P
external usenet poster
 
Posts: n/a
Default

"Markus" wrote in message
...
i have some old parts around and want to put them together. so what can i
expect with a gf1 DDR and a Cel 433? board will have an LX chipset.
what can i expect, e.g. for halflife oder q3?

thx
Markus

I used to run Half Life and Q3 no probs at 800x600 with a celeron 433 and
TNT2 16MB on a BX board if that's any help.


  #3  
Old July 17th 03, 05:15 PM
Martin Eriksson
external usenet poster
 
Posts: n/a
Default

"Markus" wrote in message
...
i have some old parts around and want to put them together. so what can i
expect with a gf1 DDR and a Cel 433? board will have an LX chipset.
what can i expect, e.g. for halflife oder q3?


Halflife should run OK at least in 800x600 16 bit. I have no experience from
Q3.

/M


  #4  
Old July 18th 03, 06:35 AM
@lias
external usenet poster
 
Posts: n/a
Default

I remember something about certain Intel chipsets that had faulty voltage
regulators which would result in some AGP cards not receiving enough voltage to
function properly. I believe the LX was one of them. (Mind you it was not all
motherboards based on the LX chipset, only some.)

If anyone knows where the GeforceFAQ site has gone, that site had a list of
motherboards that had the issue.

"Markus" wrote in message
...
i have some old parts around and want to put them together. so what can i
expect with a gf1 DDR and a Cel 433? board will have an LX chipset.
what can i expect, e.g. for halflife oder q3?

thx
Markus




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
AMD64 2800 works with VIA chipset, not with NVIDIA(!) Malcolm Street AMD x86-64 Processors 1 September 6th 04 07:58 AM
my GA7N400pro2 rev2 IDE driver tests, UltraDMA2 CD rom BAD but Igot it to work eventually. TX Gigabyte Motherboards 0 September 3rd 04 07:39 AM
Any IDE RAID cards that work with GA-8IHXP (rev 3.0)??? TJM Gigabyte Motherboards 0 May 9th 04 11:35 PM
Computer won't boot with 2000+ Athlon, 2100+ Athlon works just fine Cyde Weys General 4 July 3rd 03 12:16 PM
motherboard died and was wondering if this will work kony General 0 June 30th 03 04:08 AM


All times are GMT +1. The time now is 09:41 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.