A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Homebuilt PC's
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Skybuck Flying's Corona Game !

Thread Tools Display Modes
Old March 4th 20, 02:32 AM posted to alt.comp.hardware.pc-homebuilt
[email protected]
external usenet poster
Posts: 533
Default Skybuck Flying's Corona Game !

Strangely enough version 0.07 hangs on startup on toshiba laptop.

Itried remote debugging it but then the issue goes away.

As far as I know the application/game only uses on thread, however opengl might be using a thread internally.

There were some left overs of critical sections from when the game was threaded, but since threads were removed this should not be causing an issue.

As far as I know thread can read enter critical sections if they already acquired it.

So this has me mystified currently.

The game currently uses OnMessage and OnDone from TApplicationEvents to get the main thread under control.

Done is set to False to keep the application running.

So there are two entry points as where the main thread starts entering my code and potentially these critical sections.

Perhaps somehow Tapplication and the Tform are running two threads ?

Maybe one from openglcontrol, is this even possible ? Weird ?

I could be wrong maybe critical sections can not be entered twice, in that case maybe OnDone or OnMessage or OnPaint is called while still in the other event handler.

That could explain the lock up.

Previous versions were removed, should have left them up so people could try out those versions.

Anyway I want to know exactly what is going on so I will try some tools to automatically add log files or I myself will re-enable the console and output writeln messages to hopefully see in real time where the lockup on the toshiba occurs.

Could also be a faulty AMD/ATI driver. I did manipulate the driver versions to make it believe it's higher to be able to run star wars battlefront 2 which then still crashes. But for now I don't believe this is part of the cause. Driver could maybe be at fault as well though, seen it crash an application before.

Maybe my own TOpenGLControl contains some kind of bug at nc create and nc destroy or so.

The toshiba laptop is hyper threaded not sure if this is causing some kind of bug.

Anyway this is a very strange bug that is timing dependent. There is also a throttle in there which keeps the application running at 60 hertz, in case some of you run the game on higher frequency monitors.

In future my new games will use a more modern approach which will support higher frequencies. For now I also wonder if this throttle might be the cause of lock up somehow. Maybe higher performance timer/frequency is not yet initialized or somehow fails.

Anyway let me know if this game runs on your system or not. I would like to know how many systems are affected by this current weird bug.

Bye for now,
Old March 5th 20, 07:03 AM posted to alt.comp.hardware.pc-homebuilt
[email protected]
external usenet poster
Posts: 533
Default Skybuck Flying's Corona Game !

Good news: Problem solved by removing critical sections.

Bad news: I didn't find the core of the problem, it is probably critical section related somehow, console wouldn't come up, so writelns useless anyway and I am a bit lazy at moment, only did a few writelns

Futu I might try a logfile or so maybe later if I ever want to find this bug, but for now it's solved by simply removing unnecessary critical sections, still kinda interesting to know what went wrong. It only seems to hang on game startup right after laptop boots and logs into windows so that is kinda strange.

Current version is 0.10 and can be found here in case you missed it ! :



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Geforce Now review by Skybuck Flying. [email protected] Nvidia Videocards 0 February 4th 20 11:18 PM
Please don't feed the troll == Skybuck Flying Jack Asus Motherboards 4 August 7th 08 12:20 AM
Regarding : 'SKYBUCK FLYING' - ALL PLEASE READ v56k Nvidia Videocards 1 May 17th 04 05:10 PM
Skybuck Flying Cuzman Nvidia Videocards 18 May 16th 04 04:39 AM

All times are GMT +1. The time now is 01:49 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2004-2022 HardwareBanter.
The comments are property of their posters.