A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Homebuilt PC's
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Further Assistance



 
 
Thread Tools Display Modes
  #1  
Old May 4th 04, 04:45 AM
Daniel Yates
external usenet poster
 
Posts: n/a
Default Further Assistance

Hi all

Well, I have been doing further homework etc working towards my big day of
buying (a couple of months from now)

My current shopping list is as follows

Intel Pentium 4 3.2Ghz Prescott

I have gone for this as this one doesn't seem to have done too bad in the
temperature issue unlike the 2.8Ghz and 3.0Ghz. I contemplated the Extreme
Edition P4 also but due to Longhorn reputedly not supporting it I have
decided to avoid it for the sake of forward compatibility.

Asus P4P800 Deluxe

After having this recommended, and reading the multitude of reviews for it I
don't think there could be any alternative.

Matched Pair of 256MB Corsair CL2 RAM (512MB Total)

I am no memory expert but after reading around it seems the lower the Cas
Latency the better, and I read nothing but "ooh corsair this, ooh corsair
that" so I thought they must be good. I want the matched pair for the dual
powered RAM thingy for better performance.

2 X 120GB Maxtor DMAX+9 SATA150/7200

After reading around a bit it seems that this SATA malarcky is worth
exploiting, and with the MOBO having built in RAID and SATA support I
thought what the hell. I am supposed to place these 2 drive in a RAID 0
Stripe???? Can anyone shed light on this for me? How do I install this etc -
I have only ever installed bog standard IDE drives. This will be a clean
system in need of XP loading on it - how would I proceed to get the drives
and the OS installed and setup properly?????? Desperate for help on this
one.

Thermaltek Xavier Case - Silver

They look good and it comes with a 400W PSU. Will this PSU be enough to
supply the prescott alongside everything else. I am hoping to get a pretty
powerful graphics card at some point later on (maybe the upcoming 6800
nvidia or a FX5900).

All the other bits and bobs will be bought as well, rewriter etc etc

Desperate for some advice on this lot

Cheers

Daniel Yates



  #2  
Old May 5th 04, 04:10 AM
)-()-(
external usenet poster
 
Posts: n/a
Default

Daniel Yates wrote:

Hi all

Well, I have been doing further homework etc working towards my big day of
buying (a couple of months from now)

My current shopping list is as follows

Intel Pentium 4 3.2Ghz Prescott

I have gone for this as this one doesn't seem to have done too bad in the
temperature issue unlike the 2.8Ghz and 3.0Ghz. I contemplated the Extreme
Edition P4 also but due to Longhorn reputedly not supporting it I have
decided to avoid it for the sake of forward compatibility.

Asus P4P800 Deluxe

After having this recommended, and reading the multitude of reviews for it I
don't think there could be any alternative.

Matched Pair of 256MB Corsair CL2 RAM (512MB Total)

I am no memory expert but after reading around it seems the lower the Cas
Latency the better, and I read nothing but "ooh corsair this, ooh corsair
that" so I thought they must be good. I want the matched pair for the dual
powered RAM thingy for better performance.

2 X 120GB Maxtor DMAX+9 SATA150/7200

After reading around a bit it seems that this SATA malarcky is worth
exploiting, and with the MOBO having built in RAID and SATA support I
thought what the hell. I am supposed to place these 2 drive in a RAID 0
Stripe???? Can anyone shed light on this for me? How do I install this etc -
I have only ever installed bog standard IDE drives. This will be a clean
system in need of XP loading on it - how would I proceed to get the drives
and the OS installed and setup properly?????? Desperate for help on this
one.

Thermaltek Xavier Case - Silver

They look good and it comes with a 400W PSU. Will this PSU be enough to
supply the prescott alongside everything else. I am hoping to get a pretty
powerful graphics card at some point later on (maybe the upcoming 6800
nvidia or a FX5900).

All the other bits and bobs will be bought as well, rewriter etc etc

Desperate for some advice on this lot

Cheers

Daniel Yates


take a look a silentpcreview.com


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Assistance please! Building new computer... Ben Overclocking AMD Processors 9 January 10th 04 04:54 PM
Jumper switch for older CPU- need assistance Ron Joiner Homebuilt PC's 6 July 1st 03 10:24 PM


All times are GMT +1. The time now is 05:16 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.