If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Athlon XP 2100+ to mobile 2600+ worth the upgrage?
So I was not going to spend any more money on this system (Shuttle AN35 400
& 2x512 PC3500 RAM) but the mobile 2600+ might be a worthwhile upgrade, especially if I can get about $40-50 for my 2100+ (with AMD fan/heatsink). BTW, 2100+ is running very well at 210x10. yuki |
#2
|
|||
|
|||
OK, here's what you do.
Sell the board, sink and chip and get a DFI Infinity, mobile Barton, Thermalright SLK800-A and 38 x 80mm fan. "yuki" wrote in message ... So I was not going to spend any more money on this system (Shuttle AN35 400 & 2x512 PC3500 RAM) but the mobile 2600+ might be a worthwhile upgrade, especially if I can get about $40-50 for my 2100+ (with AMD fan/heatsink). BTW, 2100+ is running very well at 210x10. yuki |
#3
|
|||
|
|||
QBall wrote:
OK, here's what you do. Sell the board, sink and chip and get a DFI Infinity, mobile Barton, Thermalright SLK800-A and 38 x 80mm fan. Why would i want a mobile board? why would i want to go from a dual processor system to a single processor? About the Athlon MP vs Athlon XP, the Athlon MP has more cache if i remember correctly. Now what is the difference between the Barton and the Athlon core is what i'me researching now. Also do you think its worth the wait instead to go with an Opteron system? Or simply upgrade this one? Thanks! "yuki" wrote in message ... So I was not going to spend any more money on this system (Shuttle AN35 400 & 2x512 PC3500 RAM) but the mobile 2600+ might be a worthwhile upgrade, especially if I can get about $40-50 for my 2100+ (with AMD fan/heatsink). BTW, 2100+ is running very well at 210x10. yuki |
#4
|
|||
|
|||
yea but why get the 2600? get the 2400XP-M
"yuki" wrote in message ... So I was not going to spend any more money on this system (Shuttle AN35 400 & 2x512 PC3500 RAM) but the mobile 2600+ might be a worthwhile upgrade, especially if I can get about $40-50 for my 2100+ (with AMD fan/heatsink). BTW, 2100+ is running very well at 210x10. yuki |
#5
|
|||
|
|||
nick wrote:
yea but why get the 2600? get the 2400XP-M 2400XP-M only has 256kb L2 cache as far as i know. The barton 2600 has 512kb. Plus i don't have to start modding my cpu hehe. "yuki" wrote in message ... So I was not going to spend any more money on this system (Shuttle AN35 400 & 2x512 PC3500 RAM) but the mobile 2600+ might be a worthwhile upgrade, especially if I can get about $40-50 for my 2100+ (with AMD fan/heatsink). BTW, 2100+ is running very well at 210x10. yuki |
#6
|
|||
|
|||
No, I've got one and its a Barton.
"Yoyoma_2" wrote in message news:AXfec.79885$Ig.16337@pd7tw2no... nick wrote: yea but why get the 2600? get the 2400XP-M 2400XP-M only has 256kb L2 cache as far as i know. The barton 2600 has 512kb. Plus i don't have to start modding my cpu hehe. "yuki" wrote in message ... So I was not going to spend any more money on this system (Shuttle AN35 400 & 2x512 PC3500 RAM) but the mobile 2600+ might be a worthwhile upgrade, especially if I can get about $40-50 for my 2100+ (with AMD fan/heatsink). BTW, 2100+ is running very well at 210x10. yuki |
#7
|
|||
|
|||
"Yoyoma_2" wrote in message news:AXfec.79885$Ig.16337@pd7tw2no... nick wrote: yea but why get the 2600? get the 2400XP-M 2400XP-M only has 256kb L2 cache as far as i know. Then you don't know very far. All XP-M's are Bartons. The barton 2600 has 512kb. Plus i don't have to start modding my cpu hehe. "yuki" wrote in message ... So I was not going to spend any more money on this system (Shuttle AN35 400 & 2x512 PC3500 RAM) but the mobile 2600+ might be a worthwhile upgrade, especially if I can get about $40-50 for my 2100+ (with AMD fan/heatsink). BTW, 2100+ is running very well at 210x10. yuki |
#8
|
|||
|
|||
No, not all of them
eg the 2400-m comes in both 256 and 512k. same for 2200-m. F=desktop G=mobile 3=256k 4=512k AXMA2000FUT3C AthlonXP Mobile 2000+ (72W) AXMA2200FUT3C AthlonXP Mobile 2200+ (72W) AXMA2400FKT3C AthlonXP Mobile 2400+ (72W) AXMA2400FUT4C AthlonXP Mobile 2400+ (72W) AXMA2500FKT4C AthlonXP Mobile 2500+ (72W) AXMA2600FKT3C AthlonXP Mobile 2600+ (72W) AXMA2600FKT4C AthlonXP Mobile 2600+ (72W) AXMA2800FKT4C AthlonXP Mobile 2800+ (72W) AXMA3000FKT4C AthlonXP Mobile 3000+ (72W) AXMD1700FQQ3C AthlonXP Mobile 1700+ (35W) AXMD1800FQQ3B AthlonXP Mobile 1800+ (35W) AXMD1800FVQ3C AthlonXP Mobile 1800+ (35W) AXMD1800GJQ3C AthlonXP Mobile 1800+ (35W) AXMD1900FJQ3B AthlonXP Mobile 1900+ (35W) AXMD1900FJQ3C AthlonXP Mobile 1900+ (35W) AXMD1900FVQ3B AthlonXP Mobile 1900+ (35W) AXMD1900FVQ3C AthlonXP Mobile 1900+ (35W) AXMD1900GJQ3C AthlonXP Mobile 1900+ (35W) AXMD2000FJQ3C AthlonXP Mobile 2000+ (35W) AXMD2000GJQ3C AthlonXP Mobile 2000+ (35W) AXMD2000GJQ4C AthlonXP Mobile 2000+ (35W) AXMD2200FJQ3C AthlonXP Mobile 2200+ (35W) AXMD2200FJQ4C AthlonXP Mobile 2200+ (35W) AXMD2200GJQ4C AthlonXP Mobile 2200+ (35W) AXMD2400FJQ4C AthlonXP Mobile 2400+ (35W) AXMD2400GJQ4C AthlonXP Mobile 2400+ (35W) AXMG2600FQQ4C AthlonXP Mobile 2600+ (47W) AXMH1800FHQ3C AthlonXP Mobile 1800+ (45W) AXMH1900FLQ3C AthlonXP Mobile 1900+ (45W) AXMH2000FLQ3C AthlonXP Mobile 2000+ (45W) AXMH2000FQQ3C AthlonXP Mobile 2000+ (45W) AXMH2200FQQ3C AthlonXP Mobile 2200+ (45W) AXMH2400FQQ4C AthlonXP Mobile 2400+ (45W) AXMH2500FQQ4C AthlonXP Mobile 2500+ (45W) AXMS1600FWS3B AthlonXP Mobile 1600+ (25W) AXMS1600GXS3C AthlonXP Mobile 1600+ (25W) AXMS1700GXS3C AthlonXP Mobile 1700+ (25W) AXMS1800GXS3C AthlonXP Mobile 1800+ (25W) AXMS1800GXS4C AthlonXP Mobile 1800+ (25W) AXMS1900GXS4C AthlonXP Mobile 1900+ (25W) AXMS2000GXS4C AthlonXP Mobile 2000+ (25W) AXMS2100GXS4C AthlonXP Mobile 2100+ (25W) AXMT2200GXS4C AthlonXP Mobile 2200+ (25W) "QBall" wrote in message ... "Yoyoma_2" wrote in message news:AXfec.79885$Ig.16337@pd7tw2no... nick wrote: yea but why get the 2600? get the 2400XP-M 2400XP-M only has 256kb L2 cache as far as i know. Then you don't know very far. All XP-M's are Bartons. The barton 2600 has 512kb. Plus i don't have to start modding my cpu hehe. "yuki" wrote in message ... So I was not going to spend any more money on this system (Shuttle AN35 400 & 2x512 PC3500 RAM) but the mobile 2600+ might be a worthwhile upgrade, especially if I can get about $40-50 for my 2100+ (with AMD fan/heatsink). BTW, 2100+ is running very well at 210x10. yuki |
#9
|
|||
|
|||
"nick" wrote in message
... yea but why get the 2600? get the 2400XP-M "yuki" wrote in message ... So I was not going to spend any more money on this system (Shuttle AN35 400 & 2x512 PC3500 RAM) but the mobile 2600+ might be a worthwhile upgrade, especially if I can get about $40-50 for my 2100+ (with AMD fan/heatsink). BTW, 2100+ is running very well at 210x10. yuki How is the overclocking with the mobile 2400+ ? It seems that people have been able to run mobile 2500/2600+ up to 2.4/2.5GHz without too much trouble. In fact, I can actually run my XP 2100+ close to 2.2GHz, but it runs quite hot for my liking because I had to bump up the vcore to 1.75V to reach stability with Prime95. IMHO, extra $25 for 2600+ is worth the price to get faster & cooler CPU, but if 2400+ can overclock almost as well as 2600+, then I rather not spend the bucks (save for a new 64-bit system). yuki |
#10
|
|||
|
|||
"nick" wrote in message news "yuki" wrote in message ... "nick" wrote in message ... yea but why get the 2600? get the 2400XP-M "yuki" wrote in message ... So I was not going to spend any more money on this system (Shuttle AN35 400 & 2x512 PC3500 RAM) but the mobile 2600+ might be a worthwhile upgrade, especially if I can get about $40-50 for my 2100+ (with AMD fan/heatsink). BTW, 2100+ is running very well at 210x10. yuki How is the overclocking with the mobile 2400+ ? It seems that people have been able to run mobile 2500/2600+ up to 2.4/2.5GHz without too much trouble. In fact, I can actually run my XP 2100+ close to 2.2GHz, but it runs quite hot for my liking because I had to bump up the vcore to 1.75V to reach stability with Prime95. IMHO, extra $25 for 2600+ is worth the price to get faster & cooler CPU, but if 2400+ can overclock almost as well as 2600+, then I rather not spend the bucks (save for a new 64-bit system). yuki how does 2.GHz sound? they are the same chips. the only difference is the week. I am currently running a regular XP 2100+ at 2.1GHz already (210x10 @ 1.625V) Does not seem to make sense to switch to a XP-mobile 2400+ running at 2GHz. What am I missing? yuki |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Athlon 64 Mobile or Athlon 64 for Notebooks | Antonio D'Ambrosio | AMD x86-64 Processors | 3 | January 16th 05 10:11 PM |
Mobile athlon onto normal board | Gareth Tuckwell | Overclocking | 3 | October 19th 04 04:42 AM |
Mobile athlon onto normal board | Gareth Tuckwell | General | 5 | October 18th 04 06:31 PM |
How to run a Mobile Athlon in a desktop - and have a quiet system | RickB | Overclocking AMD Processors | 2 | December 17th 03 01:02 AM |
Slowest Athlon 64 humbles fastest P4 in gaming | Tone-EQ | Overclocking AMD Processors | 1 | December 15th 03 04:09 PM |