If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Should I remove my Tualatin's IHS?
I'm having trouble running my modded Celeron 1000A @ 1333. It keeps locking up
my system within 5 minutes after starting a 3D game or watching a DivX movie. Prime95 is stable though for hours. The system freezes completely (mouse+keyboard not responding, image freezes on the monitor, need to push the reset button). Prior to that there are no symptoms of decay, no error messages, no BSOD, no crashing programs. I've tried bumping up voltage to 1.75V, improving airflow, better cooling, rewiring AK4-AN11 to AK4-AK26 but none of this worked. There is only one thing I could try and that is removing the IHS. Maybe there is bad contact between IHS and core. What do you group think of this. Are instant lockups heat related and would removing the IHS solve my problem? Or am I just having bad luck with this cpu (Philippines, somewhere in 2001, don't remember the week) and will it never reach 1333? Some additional info: The system ran before with a Tualatin Celeron 1100@1525 so all components are 133MHz bus approved Specs : -- MSI BXMaster mobo -- MS6905Master v2.3 slotket (the best!) -- AN3 - AJ3 - AK4 insulated AK4-AN11 connected -- 1.65V -- 2 x 256 MB Apacer PC133CAS2 // GF4Ti4600 // SB Live! // WinMe ... -- ANTISPAM : remove the 1st man in space for email |
#2
|
|||
|
|||
Have you tried testing your ram with memtest86?
On Wed, 30 Jul 2003 15:34:10 GMT, "E®¡| \(|æ§" put his keys in ignition and wrote: ||I'm having trouble running my modded Celeron 1000A @ 1333. It keeps locking up ||my system within 5 minutes after starting a 3D game or watching a DivX movie. ||Prime95 is stable though for hours. The system freezes completely ||(mouse+keyboard not responding, image freezes on the monitor, need to push the ||reset button). Prior to that there are no symptoms of decay, no error ||messages, no BSOD, no crashing programs. ||I've tried bumping up voltage to 1.75V, improving airflow, better cooling, ||rewiring AK4-AN11 to AK4-AK26 but none of this worked. ||There is only one thing I could try and that is removing the IHS. Maybe there ||is bad contact between IHS and core. What do you group think of this. Are ||instant lockups heat related and would removing the IHS solve my problem? Or ||am I just having bad luck with this cpu (Philippines, somewhere in 2001, don't ||remember the week) and will it never reach 1333? || ||Some additional info: ||The system ran before with a Tualatin Celeron 1100@1525 so all components are ||133MHz bus approved ||Specs : ||-- MSI BXMaster mobo ||-- MS6905Master v2.3 slotket (the best!) ||-- AN3 - AJ3 - AK4 insulated AK4-AN11 connected ||-- 1.65V ||-- 2 x 256 MB Apacer PC133CAS2 // GF4Ti4600 // SB Live! // WinMe ... --- Lee. http://hits4pay.com/members/index.cgi?hangledd |
#3
|
|||
|
|||
"Lee" schreef in bericht ... Have you tried testing your ram with memtest86? Yes, my ram is fine up to FSB = 150MHz CL2. My setup was running a Celeron 1100@1525. I switched only the cpu with a Cel 1000 for testing purposes, hoping to get at least 1333 MHz. -- ANTISPAM : remove the 1st man in space for email |
#4
|
|||
|
|||
"Lee" schreef in bericht ... Have you tried testing your ram with memtest86? Yes, my ram is fine up to FSB = 150MHz CL2. My setup was running a Celeron 1100@1525. I switched only the cpu with a Cel 1000 for testing purposes, hoping to get at least 1333 MHz. -- ANTISPAM : remove the 1st man in space for email |
#5
|
|||
|
|||
Have you tried updating your video card drivers?
On Thu, 31 Jul 2003 01:03:30 GMT, "E®¡| \(|æ§" put his keys in ignition and wrote: || ||"Lee" schreef in bericht ... || Have you tried testing your ram with memtest86? || ||Yes, my ram is fine up to FSB = 150MHz CL2. My setup was running a Celeron ||1100@1525. I switched only the cpu with a Cel 1000 for testing purposes, ||hoping to get at least 1333 MHz. --- Lee. http://hits4pay.com/members/index.cgi?hangledd |
#6
|
|||
|
|||
"Lee" schreef in bericht ... Have you tried updating your video card drivers? Yep, also tried with a matrox G400 in stead of the GF4Ti4600. Same result. -- ANTISPAM : remove the 1st man in space for email |
#7
|
|||
|
|||
On Wed, 30 Jul 2003 15:34:10 GMT, "E®ˇ| \(|ć§"
wrote: I'm having trouble running my modded Celeron 1000A @ 1333. you´ve got mail ... -- Regards, SPAJKY - http://freeweb.siol.net/jerman55/HP/Spajky.htm Celly-III OC-ed,"Tualatin on BX-Slot1-MoBo!" E-mail AntiSpam: remove ## |
#8
|
|||
|
|||
No Not all celerons are equal and you will ruin your warranty.
Lane "E®¡| (|æ§" wrote in message ... I'm having trouble running my modded Celeron 1000A @ 1333. It keeps locking up my system within 5 minutes after starting a 3D game or watching a DivX movie. Prime95 is stable though for hours. The system freezes completely (mouse+keyboard not responding, image freezes on the monitor, need to push the reset button). Prior to that there are no symptoms of decay, no error messages, no BSOD, no crashing programs. I've tried bumping up voltage to 1.75V, improving airflow, better cooling, rewiring AK4-AN11 to AK4-AK26 but none of this worked. There is only one thing I could try and that is removing the IHS. Maybe there is bad contact between IHS and core. What do you group think of this. Are instant lockups heat related and would removing the IHS solve my problem? Or am I just having bad luck with this cpu (Philippines, somewhere in 2001, don't remember the week) and will it never reach 1333? Some additional info: The system ran before with a Tualatin Celeron 1100@1525 so all components are 133MHz bus approved Specs : -- MSI BXMaster mobo -- MS6905Master v2.3 slotket (the best!) -- AN3 - AJ3 - AK4 insulated AK4-AN11 connected -- 1.65V -- 2 x 256 MB Apacer PC133CAS2 // GF4Ti4600 // SB Live! // WinMe ... -- ANTISPAM : remove the 1st man in space for email |
#9
|
|||
|
|||
If Prime95 is stable then something else is the problem not the CPU........
"E®¡| (|æ§" wrote in message ... I'm having trouble running my modded Celeron 1000A @ 1333. It keeps locking up my system within 5 minutes after starting a 3D game or watching a DivX movie. Prime95 is stable though for hours. The system freezes completely (mouse+keyboard not responding, image freezes on the monitor, need to push the reset button). Prior to that there are no symptoms of decay, no error messages, no BSOD, no crashing programs. I've tried bumping up voltage to 1.75V, improving airflow, better cooling, rewiring AK4-AN11 to AK4-AK26 but none of this worked. There is only one thing I could try and that is removing the IHS. Maybe there is bad contact between IHS and core. What do you group think of this. Are instant lockups heat related and would removing the IHS solve my problem? Or am I just having bad luck with this cpu (Philippines, somewhere in 2001, don't remember the week) and will it never reach 1333? Some additional info: The system ran before with a Tualatin Celeron 1100@1525 so all components are 133MHz bus approved Specs : -- MSI BXMaster mobo -- MS6905Master v2.3 slotket (the best!) -- AN3 - AJ3 - AK4 insulated AK4-AN11 connected -- 1.65V -- 2 x 256 MB Apacer PC133CAS2 // GF4Ti4600 // SB Live! // WinMe ... -- ANTISPAM : remove the 1st man in space for email |
#10
|
|||
|
|||
"Nitza666" wrote in message news:1059790544.447376@athprx02... If Prime95 is stable then something else is the problem not the CPU........ Exactly. And if it only happens in 3d games or DivX movies I'd suspect the graphics sub-system/drivers. AGP bus out of spec? -- ~misfit~ "E®¡| (|æ§" wrote in message ... I'm having trouble running my modded Celeron 1000A @ 1333. It keeps locking up my system within 5 minutes after starting a 3D game or watching a DivX movie. Prime95 is stable though for hours. The system freezes completely (mouse+keyboard not responding, image freezes on the monitor, need to push the reset button). Prior to that there are no symptoms of decay, no error messages, no BSOD, no crashing programs. I've tried bumping up voltage to 1.75V, improving airflow, better cooling, rewiring AK4-AN11 to AK4-AK26 but none of this worked. There is only one thing I could try and that is removing the IHS. Maybe there is bad contact between IHS and core. What do you group think of this. Are instant lockups heat related and would removing the IHS solve my problem? Or am I just having bad luck with this cpu (Philippines, somewhere in 2001, don't remember the week) and will it never reach 1333? Some additional info: The system ran before with a Tualatin Celeron 1100@1525 so all components are 133MHz bus approved Specs : -- MSI BXMaster mobo -- MS6905Master v2.3 slotket (the best!) -- AN3 - AJ3 - AK4 insulated AK4-AN11 connected -- 1.65V -- 2 x 256 MB Apacer PC133CAS2 // GF4Ti4600 // SB Live! // WinMe ... -- ANTISPAM : remove the 1st man in space for email --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.505 / Virus Database: 302 - Release Date: 30/07/2003 |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
remove previous version ? | snow | Overclocking AMD Processors | 1 | December 14th 04 07:17 PM |
Which drive should I remove | Sonars_UK | General | 3 | April 7th 04 01:07 AM |
Remove startup password | Peter | General | 3 | February 2nd 04 12:20 PM |
Stupid Question - how do you remove a fan from a heatsink?! | Perdita X. Dream | General | 1 | October 25th 03 12:34 PM |
Get message "Remove disks or other media" since converting from NTFS to FAT32 | Paul Hill | General | 1 | July 6th 03 02:03 PM |