If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
hard drive clicking rather loudly
It is clicking like something is hitting the case. It did this about a week
ago and I just turned the system off, bought a new hard drive just in case and backed up everything. Is it possible that this can be fixed. It is a western digital wd400. It is only year and half old. Would spinrite software maybe help it? Any experience with this out there? Thanks much, dancer (Jenny) --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.734 / Virus Database: 488 - Release Date: 8/4/2004 |
#2
|
|||
|
|||
Jenny wrote:
It is clicking like something is hitting the case. It did this about a week ago and I just turned the system off, bought a new hard drive just in case and backed up everything. Is it possible that this can be fixed. It is a western digital wd400. It is only year and half old. Would spinrite software maybe help it? Any experience with this out there? That sounds like the symptom referred to, descriptively enough, as the 'click of death' and if it follows the pattern of my WD drives the best you can do is administer pain management; which you've done by buying a replacement and backing up your data. Next is to run the WD diagnostics to get the error code, or wait till complete failure if it passes for the short term, and get a warranty replacement. In the mean time I'd check case temps because it may be you have a hot spot around the hard drive that's causing premature failure. |
#3
|
|||
|
|||
On Fri, 6 Aug 2004 18:22:27 -0400, "Jenny"
wrote: It is clicking like something is hitting the case. It did this about a week ago and I just turned the system off, bought a new hard drive just in case and backed up everything. Is it possible that this can be fixed. It is a western digital wd400. It is only year and half old. Would spinrite software maybe help it? Any experience with this out there? Thanks much, dancer (Jenny) Is it a clank-clank-clank sound? I know it seems silly to ask that, but it happens that such a sound indicates a damaged or defective drive head. You will need to get it replaced if so. ---Atreju--- |
#4
|
|||
|
|||
How do I run the WD diagnostics??
I think you are right about temperature. I put in a new one and it already seems hotter than usual. This is in a dell 4100 and they mount the drive vertically against the front. I don't see a way to mount a fan but there is certainly space and it seems to need one. Thanks, "David Maynard" wrote in message ... That sounds like the symptom referred to, descriptively enough, as the 'click of death' and if it follows the pattern of my WD drives the best you can do is administer pain management; which you've done by buying a replacement and backing up your data. Next is to run the WD diagnostics to get the error code, or wait till complete failure if it passes for the short term, and get a warranty replacement. In the mean time I'd check case temps because it may be you have a hot spot around the hard drive that's causing premature failure. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.734 / Virus Database: 488 - Release Date: 8/4/2004 |
#5
|
|||
|
|||
I would describe it as more of a click than a clank.
"Atreju" wrote in message ... Is it a clank-clank-clank sound? I know it seems silly to ask that, but it happens that such a sound indicates a damaged or defective drive head. You will need to get it replaced if so. ---Atreju--- --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.734 / Virus Database: 488 - Release Date: 8/4/2004 |
#6
|
|||
|
|||
Jenny wrote:
How do I run the WD diagnostics?? If you don't have the disk go to the western digital site and download their 'lifeguard' disk. I think you are right about temperature. I put in a new one and it already seems hotter than usual. This is in a dell 4100 and they mount the drive vertically against the front. I don't see a way to mount a fan but there is certainly space and it seems to need one. Thanks, That seems to be a popular mounting style these days. I just worked on an HP machine that was the same way. Had a dead western digital hard drive too, and guess what the symptom was: click, click, click, click, click. "David Maynard" wrote in message ... That sounds like the symptom referred to, descriptively enough, as the 'click of death' and if it follows the pattern of my WD drives the best you can do is administer pain management; which you've done by buying a replacement and backing up your data. Next is to run the WD diagnostics to get the error code, or wait till complete failure if it passes for the short term, and get a warranty replacement. In the mean time I'd check case temps because it may be you have a hot spot around the hard drive that's causing premature failure. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.734 / Virus Database: 488 - Release Date: 8/4/2004 |
#7
|
|||
|
|||
I had exactly the same problem about 4 months ago. The WD diagnostics said
it was a damaged IDE cable. Sceptically I replaced it, and lo and behold, no more clicking. Although we are backing evrything up to CD and made sure SMART was turned on the_gnome "David Maynard" wrote in message ... Jenny wrote: How do I run the WD diagnostics?? If you don't have the disk go to the western digital site and download their 'lifeguard' disk. I think you are right about temperature. I put in a new one and it already seems hotter than usual. This is in a dell 4100 and they mount the drive vertically against the front. I don't see a way to mount a fan but there is certainly space and it seems to need one. Thanks, That seems to be a popular mounting style these days. I just worked on an HP machine that was the same way. Had a dead western digital hard drive too, and guess what the symptom was: click, click, click, click, click. "David Maynard" wrote in message ... That sounds like the symptom referred to, descriptively enough, as the 'click of death' and if it follows the pattern of my WD drives the best you can do is administer pain management; which you've done by buying a replacement and backing up your data. Next is to run the WD diagnostics to get the error code, or wait till complete failure if it passes for the short term, and get a warranty replacement. In the mean time I'd check case temps because it may be you have a hot spot around the hard drive that's causing premature failure. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.734 / Virus Database: 488 - Release Date: 8/4/2004 |
#8
|
|||
|
|||
I've heard hard drive clicking many times, and that's an indication
it's about to fail. Good reason to backup now ! On Fri, 6 Aug 2004 18:22:27 -0400, "Jenny" wrote: It is clicking like something is hitting the case. It did this about a week ago and I just turned the system off, bought a new hard drive just in case and backed up everything. Is it possible that this can be fixed. It is a western digital wd400. It is only year and half old. Would spinrite software maybe help it? Any experience with this out there? Thanks much, dancer (Jenny) --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.734 / Virus Database: 488 - Release Date: 8/4/2004 |
#9
|
|||
|
|||
the gnome wrote:
I had exactly the same problem about 4 months ago. The WD diagnostics said it was a damaged IDE cable. Sceptically I replaced it, and lo and behold, no more clicking. Although we are backing evrything up to CD and made sure SMART was turned on Glad it wasn't the drive. The one I referred to, though, was checked in three other systems. the_gnome "David Maynard" wrote in message ... Jenny wrote: How do I run the WD diagnostics?? If you don't have the disk go to the western digital site and download their 'lifeguard' disk. I think you are right about temperature. I put in a new one and it already seems hotter than usual. This is in a dell 4100 and they mount the drive vertically against the front. I don't see a way to mount a fan but there is certainly space and it seems to need one. Thanks, That seems to be a popular mounting style these days. I just worked on an HP machine that was the same way. Had a dead western digital hard drive too, and guess what the symptom was: click, click, click, click, click. "David Maynard" wrote in message ... That sounds like the symptom referred to, descriptively enough, as the 'click of death' and if it follows the pattern of my WD drives the best you can do is administer pain management; which you've done by buying a replacement and backing up your data. Next is to run the WD diagnostics to get the error code, or wait till complete failure if it passes for the short term, and get a warranty replacement. In the mean time I'd check case temps because it may be you have a hot spot around the hard drive that's causing premature failure. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.734 / Virus Database: 488 - Release Date: 8/4/2004 |
#10
|
|||
|
|||
Your hard drive is about to kick the bucket. I've seen this happen on 2
hard drives before, and both were WD drives. -- Lenny Vaz -- "Jenny" wrote in message ... It is clicking like something is hitting the case. It did this about a week ago and I just turned the system off, bought a new hard drive just in case and backed up everything. Is it possible that this can be fixed. It is a western digital wd400. It is only year and half old. Would spinrite software maybe help it? Any experience with this out there? Thanks much, dancer (Jenny) --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.734 / Virus Database: 488 - Release Date: 8/4/2004 |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
how to test psu and reset to cmos to default | Tanya | General | 23 | February 7th 05 09:56 AM |
ATA100 hard drive not recognized when PS/2 mouse is not attached | S. Lipson | Homebuilt PC's | 2 | July 27th 04 09:55 PM |
Clicking Hard Drive | Shadow_>>> | General | 6 | July 27th 04 05:12 AM |
Large Hard Drive & BIOS upgrade problems | Lago Jardin | Overclocking | 10 | June 13th 04 12:56 AM |
Large Hard Drive & BIOS upgrade problems | Lago Jardin | Homebuilt PC's | 1 | June 12th 04 02:08 PM |