A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » General
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Silicom DoubleSerial PC Card



 
 
Thread Tools Display Modes
  #1  
Old January 9th 08, 11:40 PM posted to alt.comp.hardware
******************
external usenet poster
 
Posts: 2
Default Silicom DoubleSerial PC Card

Hello,

I bought Silicom S2S DoubleSerial PCMCIA Card. And I have got a
problem. I installed DOS 6.22 and DOS drivers, but card was not working -
even, if IRQ and other parameters are manually specified.

Please look at this initialization communicat (it seems to be correct):

http://www.wlan.webd.pl/xxx/1.jpg

Then, when I would like to test it there is an error:

http://www.wlan.webd.pl/xxx/2.jpg

and:

http://www.wlan.webd.pl/xxx/3.jpg

I checked my IRQ's and other stuff by SiSoft Sandra - here you have
these logs:

================================================== ==================================================
SiSoftware Sandra - Memory Range
================================================== ==================================================

000A0000 - 000BFFFF : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R)
945GT Express PCI Express Root Port - 27A1
000A0000 - 000BFFFF : NVIDIA GeForce Go 7600
000A0000 - 000BFFFF : PCI bus
000D0000 - 000D3FFF : PCI bus
000D4000 - 000D7FFF : PCI bus
000D8000 - 000DBFFF : PCI bus
000DB000 - 000DBFFF : ENE CB-712/714/810 Cardbus Controller
C0000000 - CFFFFFFF : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R)
945GT Express PCI Express Root Port - 27A1
C0000000 - CFFFFFFF : NVIDIA GeForce Go 7600
C0000000 - FEBFFFFF : PCI bus
D0000000 - D0FFFFFF : NVIDIA GeForce Go 7600
D0000000 - D1FFFFFF : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R)
945GT Express PCI Express Root Port - 27A1
D1000000 - D1FFFFFF : NVIDIA GeForce Go 7600
D2000000 - D2000FFF : ENE CB-712/714/810 Cardbus Controller
D2100000 - D2100FFF : Intel(R) PRO/Wireless 3945ABG Network Connection
D2100000 - D21FFFFF : Intel(R) 82801G (ICH7 Family) PCI Express Root Port -
27D0
D2200000 - D2200FFF : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
D2200000 - D22FFFFF : Intel(R) 82801G (ICH7 Family) PCI Express Root Port -
27D4
D2500000 - D2503FFF : Microsoft UAA Bus Driver for High Definition Audio
D2504000 - D25043FF : Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host
Controller - 27CC
E0000000 - EFFFFFFF : Motherboard resources
F6BFE000 - FABFDFFF : ENE CB-712/714/810 Cardbus Controller
FABFE000 - FABFEFFF : ENE CB-712/714/810 Cardbus Controller
FABFF580 - FABFF5FF : ENE PCI Memory Stick Card Reader Controller
FABFF600 - FABFF6FF : SDA Standard Compliant SD Host Controller
FABFF700 - FABFF7FF : ENE PCI Secure Digital / MMC Card Reader Controller
FABFF800 - FABFFFFF : VIA OHCI Compliant IEEE 1394 Host Controller
FAC00000 - FEBFFFFF : Intel(R) 82801G (ICH7 Family) PCI Express Root Port -
27D6
FED00000 - FED003FF : High precision event timer
FED14000 - FED17FFF : Motherboard resources
FED18000 - FED18FFF : Motherboard resources
FED19000 - FED19FFF : Motherboard resources
FED1C000 - FED1FFFF : Motherboard resources
FED20000 - FED3FFFF : Motherboard resources
FED40000 - FED44FFF : Infineon Trusted Platform Module
FED40000 - FED44FFF : PCI bus
FED45000 - FED8FFFF : Motherboard resources
FF000000 - FFFFFFFF : Intel(R) 82802 Firmware Hub Device


================================================== ==================================================
SiSoftware Sandra - I/O Range
================================================== ==================================================

00000000 - 0000001F : Direct memory access controller
00000000 - 00000CF7 : PCI bus
00000020 - 00000021 : Programmable interrupt controller
00000024 - 00000025 : Programmable interrupt controller
00000028 - 00000029 : Programmable interrupt controller
0000002C - 0000002D : Programmable interrupt controller
0000002E - 0000002F : Motherboard resources
00000030 - 00000031 : Programmable interrupt controller
00000034 - 00000035 : Programmable interrupt controller
00000038 - 00000039 : Programmable interrupt controller
0000003C - 0000003D : Programmable interrupt controller
00000040 - 00000043 : System timer
0000004E - 0000004F : Infineon Trusted Platform Module
00000050 - 00000053 : System timer
00000060 - 00000060 : Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
00000061 - 00000061 : Motherboard resources
00000062 - 00000062 : Microsoft ACPI-Compliant Embedded Controller
00000063 - 00000063 : Motherboard resources
00000064 - 00000064 : Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
00000065 - 00000065 : Motherboard resources
00000066 - 00000066 : Microsoft ACPI-Compliant Embedded Controller
00000067 - 00000067 : Motherboard resources
00000070 - 00000070 : Motherboard resources
00000070 - 00000077 : System CMOS/real time clock
00000080 - 00000080 : Motherboard resources
00000081 - 00000091 : Direct memory access controller
00000092 - 00000092 : Motherboard resources
00000093 - 0000009F : Direct memory access controller
000000A0 - 000000A1 : Programmable interrupt controller
000000A4 - 000000A5 : Programmable interrupt controller
000000A8 - 000000A9 : Programmable interrupt controller
000000AC - 000000AD : Programmable interrupt controller
000000B0 - 000000B1 : Programmable interrupt controller
000000B2 - 000000B3 : Motherboard resources
000000B4 - 000000B5 : Programmable interrupt controller
000000B8 - 000000B9 : Programmable interrupt controller
000000BC - 000000BD : Programmable interrupt controller
000000C0 - 000000DF : Direct memory access controller
000000F0 - 000000F0 : Numeric data processor
00000170 - 00000177 : Secondary IDE Channel
000001F0 - 000001F7 : Primary IDE Channel
00000274 - 00000277 : ISAPNP Read Data Port
00000279 - 00000279 : ISAPNP Read Data Port
00000376 - 00000376 : Secondary IDE Channel
000003B0 - 000003BB : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R)
945GT Express PCI Express Root Port - 27A1
000003B0 - 000003BB : NVIDIA GeForce Go 7600
000003C0 - 000003DF : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R)
945GT Express PCI Express Root Port - 27A1
000003C0 - 000003DF : NVIDIA GeForce Go 7600
000003F6 - 000003F6 : Primary IDE Channel
000004D0 - 000004D1 : Programmable interrupt controller
00000800 - 0000080F : Motherboard resources
00000A79 - 00000A79 : ISAPNP Read Data Port
00000D00 - 0000FFFF : PCI bus
00001000 - 0000107F : Motherboard resources
00001180 - 000011BF : Motherboard resources
00001670 - 0000167F : Infineon Trusted Platform Module
00001800 - 0000181F : Intel(R) 82801G (ICH7 Family) USB Universal Host
Controller - 27C8
00001820 - 0000183F : Intel(R) 82801G (ICH7 Family) USB Universal Host
Controller - 27C9
00001840 - 0000185F : Intel(R) 82801G (ICH7 Family) USB Universal Host
Controller - 27CA
00001860 - 0000187F : Intel(R) 82801G (ICH7 Family) USB Universal Host
Controller - 27CB
000018B0 - 000018BF : Intel(R) 82801GBM/GHM (ICH7-M Family) Serial ATA
Storage Controller - 27C4
000018C0 - 000018DF : Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
00002000 - 0000207F : NVIDIA GeForce Go 7600
00002000 - 00002FFF : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R)
945GT Express PCI Express Root Port - 27A1
00003000 - 000030FF : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
00003000 - 00003FFF : Intel(R) 82801G (ICH7 Family) PCI Express Root Port -
27D4
0000F000 - 0000FFFF : Intel(R) 82801G (ICH7 Family) PCI Express Root Port -
27D6
0000F900 - 0000F9FF : ENE CB-712/714/810 Cardbus Controller
0000FA00 - 0000FAFF : ENE CB-712/714/810 Cardbus Controller
0000FD80 - 0000FDFF : VIA OHCI Compliant IEEE 1394 Host Controller
0000FE00 - 0000FE7F : Motherboard resources
0000FE80 - 0000FEFF : Motherboard resources
0000FF00 - 0000FF7F : Motherboard resources
0000FFE0 - 0000FFEF : SCSI/RAID Host Controller


================================================== ==================================================
SiSoftware Sandra - IRQ Numbers
================================================== ==================================================

0 : System timer
1 : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
8 : System CMOS/real time clock
9 : Microsoft ACPI-Compliant System
9 : SCSI/RAID Host Controller
10 : Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
12 : Elantech Touchpad
13 : Numeric data processor
14 : Primary IDE Channel
15 : Secondary IDE Channel
16 : ENE CB-712/714/810 Cardbus Controller
16 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
16 : Intel(R) PRO/Wireless 3945ABG Network Connection
16 : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R) 945GT Express PCI
Express Root Port - 27A1
16 : NVIDIA GeForce Go 7600
17 : ENE PCI Memory Stick Card Reader Controller
17 : ENE PCI Secure Digital / MMC Card Reader Controller
17 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D0
17 : SDA Standard Compliant SD Host Controller
18 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D4
18 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
18 : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
19 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D6
19 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
20 : VIA OHCI Compliant IEEE 1394 Host Controller
22 : Microsoft UAA Bus Driver for High Definition Audio
23 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
23 : Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC


In Windows I can't even install this card - there is immediately blue
screen and computer resets....
Can you please provide me informagtion what should I do? Thanks!

--
http://www.orinoco.wlan.webd.pl
Unofficial ORiNOCO Support Page including ORiNOCO USB Classic Client
Simply the best!!!
  #2  
Old January 10th 08, 12:49 AM posted to alt.comp.hardware
Gerard Bok
external usenet poster
 
Posts: 177
Default Silicom DoubleSerial PC Card

On Wed, 9 Jan 2008 23:40:58 +0100, ******************
wrote:

I bought Silicom S2S DoubleSerial PCMCIA Card. And I have got a
problem. I installed DOS 6.22 and DOS drivers, but card was not working -
even, if IRQ and other parameters are manually specified.

Please look at this initialization communicat (it seems to be correct):

http://www.wlan.webd.pl/xxx/1.jpg

Then, when I would like to test it there is an error:

http://www.wlan.webd.pl/xxx/2.jpg


Does the manual tell you that you can test the serial port
without anything attached ? Did you attach something ?

Mostly, serial ports are tested with either a device or a loop
back plug attached.

I Would suggest to connect a loopback plug or, lacking one, some
serial device like a modem or a serial Mouse.
http://www.hardwarebook.info/ will tell you how to built a
loopback plug.

--
Kind regards,
Gerard Bok
  #3  
Old January 10th 08, 03:29 PM posted to alt.comp.hardware
******************
external usenet poster
 
Posts: 2
Default Silicom DoubleSerial PC Card

Dnia Wed, 09 Jan 2008 23:49:22 GMT, Gerard Bok napisał(a):

Does the manual tell you that you can test the serial port
without anything attached ? Did you attach something ?


Yes, I attached many things. And the same result, nothing is working, test
failed.

--
http://www.orinoco.wlan.webd.pl
Unofficial ORiNOCO Support Page including ORiNOCO USB Classic Client
Simply the best!!!
  #4  
Old January 11th 08, 10:53 AM posted to alt.comp.hardware
Brian Cryer
external usenet poster
 
Posts: 62
Default Silicom DoubleSerial PC Card

"******************" wrote in message
...
Dnia Wed, 09 Jan 2008 23:49:22 GMT, Gerard Bok napisał(a):

Does the manual tell you that you can test the serial port
without anything attached ? Did you attach something ?


Yes, I attached many things. And the same result, nothing is working, test
failed.


Did you recently buy this card? If so I suggest you contact the manufacturer
or the retailer with a view to replacing it.
--
Brian Cryer
www.cryer.co.uk/brian



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Remedy for bad graphics card bios flash --- use PCI graphics card WITH dead AGP card to reflash bios [email protected] General 1 January 22nd 06 06:59 PM
Silicom parallel port chip Jaap Keuter General 3 November 22nd 04 12:21 PM
Upgrade sound card and video card ,xp media center edition Sam-No Spam Plz Dell Computers 0 August 28th 04 04:32 PM
Can enabling AGP Fast Write on a AGP card which does not support this feature damaged the AGP card ? Andy Smith Nvidia Videocards 0 October 10th 03 08:42 PM
Can enabling AGP Fast Write on a AGP card which does not support this feature damaged the AGP card ? Andy Smith Nvidia Videocards 4 October 10th 03 07:56 PM


All times are GMT +1. The time now is 12:12 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.