If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Adaptec 2420SA + seagate Barracude 2 LP = FAIL
I just tried some SEagate barracuda 2TB LP drives on some Adaptec 2420SA
sata II raid cards. No dice. the adaptecs are running the latest 5.2.whatever firmware. they see the seagate drives, the firmware rev, the capacity (1800GB) but say the drive is not responding. Seagate doesn't mention anything about these or any other 2TB drives working with this controller. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ECS N2U400-A + Seagate SATA + Adaptec 1210SA = Aarrrgggghhh! | [email protected] | Storage (alternative) | 0 | February 17th 06 11:48 PM |
Vantec EZ-Swap not compatible with Seagate Barracude 200 GB drives | John Faughnan | Storage (alternative) | 0 | April 30th 05 09:18 PM |
Seagate barracude 7200.7 plus 120 gb seeks when idle | Halfgaar | General | 11 | January 19th 05 11:56 PM |
Asus K8V AMD Athlon 64 3200+ Thermaltake w010 Kingston Memory KVR400X72C3A/512 V9950TVD / NVIDIA FX5900 Seagate SATA ST3120026AS SCSI Adaptec 19160 | Lost One | Asus Motherboards | 0 | February 23rd 04 02:12 AM |
Adaptec 2940UW BIOS - Seagate 47 gig SCSI3 drive capacity question | feklar | Storage (alternative) | 4 | July 10th 03 11:17 PM |