A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Video Cards » Nvidia Videocards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Is it Possible to Use Regular Nvidia drivers on Nforce2 Board?



 
 
Thread Tools Display Modes
  #1  
Old July 15th 03, 03:00 PM
Rick Cathey
external usenet poster
 
Posts: n/a
Default Is it Possible to Use Regular Nvidia drivers on Nforce2 Board?

I built a system using the Epox 8RGA+ motherboard that has the onboard
GeForce4 MX graphics chip. After installing WinXP Professional and
reloading all my apps I found that during screen changes in Links 2003
it would take almost a minute sometimes to switch to the next screen
during game play. After doing a search using dejanews I found this to
be a well known problem among Limks users. Some claimed they had the
best success using the 30.82 drivers from the Nvidia site.

This is my first build using the Nforce2 chipset with onboard graphics
so my question is can I use the 30.82 drivers with the onboard
graphics chip or do I have to stay with the NForce2 drivers only?

Thanks for any input
Rick
  #2  
Old July 15th 03, 04:25 PM
Dave
external usenet poster
 
Posts: n/a
Default

Yes, you can load the 30.82 video driver. Just install it right over the
top.
Dave

"Rick Cathey" wrote in message
...
I built a system using the Epox 8RGA+ motherboard that has the onboard
GeForce4 MX graphics chip. After installing WinXP Professional and
reloading all my apps I found that during screen changes in Links 2003
it would take almost a minute sometimes to switch to the next screen
during game play. After doing a search using dejanews I found this to
be a well known problem among Limks users. Some claimed they had the
best success using the 30.82 drivers from the Nvidia site.

This is my first build using the Nforce2 chipset with onboard graphics
so my question is can I use the 30.82 drivers with the onboard
graphics chip or do I have to stay with the NForce2 drivers only?

Thanks for any input
Rick



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New nVidia 5.1 platform drivers Sam Asus Motherboards 0 September 17th 04 07:52 PM
NVIDIA Unveils New 64-Bit Drivers for NVIDIA nForce Platforms Too_Much_Coffee ® Overclocking AMD Processors 0 April 21st 04 08:15 PM
GA-7N400 Pro 2 - nvidia drivers Mark Epps Gigabyte Motherboards 1 April 13th 04 06:08 PM
CUV4X + GeForce incompatible with recent nVidia drivers? Jessica Loriena Asus Motherboards 5 February 29th 04 01:43 AM
Omega drivers for Nvidia are AXED!?! Pluvious Nvidia Videocards 15 June 29th 03 08:50 PM


All times are GMT +1. The time now is 01:47 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.