Thanks ! If I understand correctly, you mean I should use:
Display properties
Screen Saver:
None
Power Option Properties
Power Schemes
Turn Off Monitor fter 15-30 Mins
"John McGaw" wrote in message
...
"dave" wrote in message
nk.net...
I have a Samsung 17 " SyncMaster 174v monitor. Even with a very low
brightness level when I use a blank screen screensaver setting, when the
computer goes into screensaver mode, there is a very noticeable glow on
the
screen. By comparison if I use the turn off monitor setting and set it
for
a
short time like 1 or 2 minutes when it turns off, the screen goes
completely
black with no visible glow at all. Is it therefore better to use the
turn
off monitor setting after a minute or two rather than using the
screensaver
with blank screen setting for the same time interval ? Is the some kind
of
strain on the monitor when using the turn off monitor setting. By
contrast
is there some kind screen burning/dulling by the persistant glow when
using
the blank screen screensaver setting ?
If the monitor is merely going black, vs. powering down you are wearing
out
the most vulnerable portion of the monitor -- the backlight. I would
certainly use the power down function. But I wouldn't do it with a 1 or 2
minute timout since that will result (at least it would on any of my
computers) in repeated startups at short intervals which seem more likely
to
be damaging to the lamps and inverters which drive them. Shutting down
after
maybe 15-30 minutes seems more reasonable to me.
--
John McGaw
[Knoxville, TN, USA]
Return address will not work. Please
reply in group or through my website:
http://johnmcgaw.com