GA-78LMT-USB3, no USB3
On Tue, 1 Apr 2014 11:04:01 +0100, "R. Mark Clayton"
wrote:
"John" wrote in message
.. .
A friend has a system based on a GA-78LMT-USB3 (mobo rev 5.0) and
can't get any of his USB3 ports to work. The USB2s are fine, but the
USB3s, both on the front panel and the back panel, are not.
The ports have power -- when an MP3 player is plugged in, it charges.
But there is no data connectivity. The system (Windows 7, 64-bit)
can't see any device that he plugs in.
I checked the BIOS settings and USB3 is enabled. I tried to reinstall
the USB3 driver (D/L'd from the Gigabyte site) and the installation
failed, saying it could not find the hardware.
I'm thinking he has a hardware problem and he's going to have to
return the box and probably have the mobo replaced. But before he
does that, is there anything else I can try?
Thanks for any suggestions
Reply-to address is real
John
W7 does not have native support for USB3
You will probably need something actually USB3 plugged in to install
drivers.
Otherwise "upgrade" to W8.1
I've installed USB3 drivers on another Win7 system (the one I'm using
now) with nothing plugged in. The driver is on the mobo
driver/utility disk that typically gets installed right after Windows.
Device Manager shows USB3 root hubs and host controllers installed and
working properly.
In my friend's case, Device Manager does not show any USB3 devices,
and the driver would not install because it couldn't find the
hardware.
Reply-to address is real
John
|