Hi,

Thanks for your answer

The problem is not about "booting the operating system" but on "the scsi
boot" with the specific bios message :
acces to the BIOS press CRTL A . This option will let me choose the scsi
cd-rom device like the 1 first boot (Debian cd1)

My Advanced BIOS :
# advanced bios feature scsi/raid ctrl bot order 1-adaptec scsi 2- ite
3-ata 4- silicon
# advanced bios feature first boot device -floppy- second -scsi-
third -hdd0-

I let you see my configuration :
http://optimates.sorbonne.free.fr/do...ro2/Report.txt

The main board picture and the scsi card picture :
http://optimates.sorbonne.free.fr/do...2/DSCN0065.JPG

I do not have any trouble with the scsi hard drive or another device. I am
just asking me why I am unable to acces to the scsi bios.

My have tested my scsi bios with flash5.exe from Adaptec, and the bios
anwser : v3.10.0.0



"Jeff French" a écrit dans le message de news:
9qXsd.522719$D%.107883@attbi_s51...
DreamK,
Is the SCSI card properly installed? What does your Device Manager
display? Have you installed the SCSI adapter drivers? Are you booting this
system using another operating system on another hard drive and are trying
to boot to an operating system on the SCSI hard drives?

I would suggest removing all other hard drives but one SCSI drive. Install
WinXP using the F6 option. Once you have installed WinXP on this SCSI hard
drive the SCSISelect message should work.

Good Luck
Jeff French

"[ DreamK ]" wrote in message
...
Hi

I would like to know if someone managed to install this main bord (under
bios v.FJ) with this scsi extension card.

====================
PROBLEM :
====================
the scsi bios message is not shown at the boot
CTRL-A is not working


====================
Components :
====================
sata : 2x dd Hitachi 120 Go Serial ATA 150 - 7200 trs/min - Buffer 8Mo
ide : 2x dd Maxtor DiamondMax Plus 40 Go 7200 trs/min - UDMA 133 - Buffer
2 Mo
scsi : controler 39160 adaptec + [2x dd atlas quatum V 9,8Go +
terminaison lvd] + [ cdrom SE plextor 40]
CPU : SEMPRON 2400
DDR : kingston 3200 256Mo

====================
BIOS Settings :
====================
# advanced bios feature scsi/raid ctrl bot order 1-adaptec scsi 2-
ata 3-ite 4- silicon
# advanced bios feature first boot device -floppy- second -scsi-
third -hdd0-
# IRQ -option auto-


Any suggestion ?

Sincerily

PS : sorry for my bad english