open up the switch and see if you can replace the memory module. If its
onboard... the thing is most likely toast.

LC

wrote in message
om...
I have a switch sw3322 during the diagnostic test i have this message

Descriptor Table Memory -- Address line, random data ..............
FAILED.


!!!
!!! -- FAILED Descriptor Table Memory -- Address line, random data
--
!!!
!!! Reason: Memory test failed.
!!!
!!! Run number : 1
!!! Failed address : 0x000209C3
!!! Expected data : 0x 46
!!! Actual data : 0x 0
!!!


================================================== ==========================

I would like know how i can resolve the problem because this error
give me a problem during the start up.

Thanks
Mauro