"Pen" wrote in message t...

The black/white are a pair as are the brown/blue.
Using an ohmmeter check the switch pins to see what gets
shorted together when turned on.

So you're supposed to short the black & white together and
the brown & blue together? That's the impression you give,
even though you didn't mean it.

Hughes Patans:

The power comes in on the black & white wires and goes out
the brown and blue wires. The switch has to be wired for this,
and if you look at the switch from the front, that is, down its
long end, you'll want to connect the black and brown wires on
the right and the white and blue wires on the left.