Fred at home wrote:
"Fa" wrote in message
...
hi all
i'm sorry for "bad" english but i'm italian )

i some problem during install a sata HD on 7n400 pro2 in base mode
first of all i've configured bios with this settings:

Adv. bios features --sata\raid\scsi boot order: "sata"
Adv. bios feat. --first boot device: "scsi"
Adv. bios feat. --second boot dev.: "floppy"
Adv. bios feat. --third boot dev.: "cdrom"
Integr. perif. -- onboard h\w serial ata: "enable"
Integr. perif. -- serial ata function: "base"

then i begun ti install WinXP, F6, plugged in the floppy with
Si3112 (not si3112r) driver and then, when installation was
complete, rebooted.

after reboot, the system seems not found the sata hd !! ;__;

i try to install the driver on the previous OS on uATA HD, and all
seems ok: i can see the winxp installation file on sata hd, but it
can't boot by itself

help please
and happy Easter


p.s.: i tried with both new and old driver and bios version....


Do you have any other PCI IDE controller cards fitted to the
motherboard?

no, my complete hardware is:
-amd 2400+ (running @2340mhz 203*11.5x 10% overvolt with coolermaster
x-dream at 40°C)
-7n400 pro2
-2x512 MB ram corsair XMS pc3200 (2-3-3-6)
-ATI AIW 9700 pro
-1 addictional LAN card
-1 HD maxtor 80GB serial ATA
-2 HD maxtor 60GB ultra ATA