Just been surfing -
Slots 123= Single Channel 64bit. Slots 1-3 = dual channel 128bit slots 2-3
most people think that its dual channel but its not on the ASUS!! 1-3 is
only DC DDR.
Dom
"Doug Ramage" wrote in message
...
Are you sure?
My non-E needs 256Mb sticks in slots 1 & 2 (= Channel 1) and 512Mb stick
in
slot 3 (= Channel 2) for dual channel mode.
But the E version could be different?
--
Doug Ramage
"D R Tester" wrote in message
...
So long as the ram has similar specs i.e. can run at the same timings
should
not be a problem. Run your 2 sticks of 256MB in slots 1 & 3 and the
512MB
in
slot 2 - that way you'll run in dual channel....
Dom
"JL" wrote in message
...
Hi,
Just a quick question: I have to PC3200 2.5 256mb TwinMos Stick in my
rig and want to expand to 1.GB
Is it good enough if I buy an extra 512Mb (so I have 2x256 + 1x512) or
do you recommend me to sell those 256 and get two 1MBs.
Also, is it crucial that all the sticks are the same brand-specs of if
I get another 2.5 with similar specs is good enough (not sure I'll be
able to find the same TwinMos)
Please let me know your opinion. TIA
JL
|