View Single Post
  #1  
Old June 27th 03, 05:36 PM
Award
external usenet poster
 
Posts: n/a
Default IBM switch 8275-324

Hi guyz
i've got a problem with the switch in Object. I think a memory chip has
gone.
During bootstrap if memory test start, it find an error in a location (i
suppose bank 0) and the system hang. If the memtest it's going to be skipped
the system start regularly (i suppose, cause i don't have the system
password
to get in and try to work) Does someone have skematics to see wich bank
is goin to be changed??
I'm not sure it's a ram problem, please confirm or not!!
Does someone know how to bypass the security check???
(As usual the new admin doesn't get password from the previous one)

For more clearly this is the POST. (I work in local via Serial cable)

------------------MODE POST ON-------------------

******************************************
* *
* Press Ctrl+C to Skip Memory Test *
* *
******************************************

* NPB test/Initialize ................ DeviceNo = 3 PID = 1
* PSP number detect...................
Test PSP 0 registers ...OK REV = D3 CNF = 4
Test PSP 1 registers ...OK REV = D3 CNF = 5
Test PSP 2 registers ...OK REV = D3 CNF = 6
Test PSP 3 registers ...OK REV = D3 CNF = 7
* PSP memory read/write test .........
0x400 -- 0x4000 ... OK
0x8000 -- 0xffff ... OK
0x10000 -- 0xfffff ...
Error Addr - E0000
Expect : 0
Read : 80000
**** Please check PSP(0,1,2,3) : 0

0x100000 -- 0x140000 ... OK
0x140000 -- 0x180000 ... OK
0x180000 -- 0x1c0000 ... OK
0x1c0000 -- 0x1fffff ... OK
System Failed !!!!

------------------MODE POST OFF-------------------

Ciao

Award
___________
C u in /dev/null