Amy L. wrote:
Rob/Anyone,
When this board posts with one memory chip in slot 1. The post status
information lists that "DDR DIMMS IN SLOT: 0 1". When I put a chip in
slot 3 as well it says "DDR DIMMS IN SLOT: 0 1 4 5"
Is this normal?
I am almost pretty sure that this board is bad.. I have a few more
tests to run.
Amy.
This is a correct indication. Each socket has 2 Rows associated with it.
Socket 1=Rows 0&1
Socket 2=Rows 2&3
Socket 3=Rows 4&5
If memtest passed on all 3 of the sticks and if the system still freezes
up after you've relaxed the memory settings, have you tried increasing
the DDR Voltage in BIOS from 2.6 to 2.7?
Rob
|