That is the wrong order. You should remove the battery first then briefly
move the jumper and return it before putting the battery back. Doing it your
way may have damaged some components. You should have read the manual first.

"Mike Gregory" wrote in message
...
I have the following problem.
I tried to clear the CMOS at a motherboard A7N8X Deluxe. Well I moved the
jumper from the position 1-2 to position 2-3 I removed the battery. Then
reinstall the battery and move the jumper back.
I can not boot anymore. I don't hear nothing. No beep. I can not see
nothing. The pc is dead. The onboard green led is open . I can see the
green
light.

Please advice and help.

Thanks in advance.