P4T-E not posting
It's far more likely to be the motherboard than the CPU.
John O wrote:
I have one of these boards which runs the fans fine, LED is on properly,
and the HD spins up but the system will not post and no video signal and
no beeps. The PS voltages look great (measured with a meter) and with
all of the cards and drives pulled, I still have no beeps. The HD light
stays on and I have tried reseating the CPU and RAM. I am down to a
possible MB or CPU problem. The only history I know of the system is
that it was locking up with regularity before the no POST problem
occurred. I measured the voltage on the CMOS battery and it is at 3 VDC.
I just wanted to see if I am on the right path with the MB or CPU
problems. I guess that I just am too stubborn to believe that the MB is
gone. Thanks for any thoughts.
John O.
|