View Single Post
  #2  
Old December 22nd 05, 02:24 AM posted to alt.comp.periphs.videocards.nvidia
external usenet poster
 
Posts: n/a
Default Yet another nVidia display driver that does not work.

default wrote:
Every 8x.xx driver has behaved the same including the new 81.98. During
install, the screen goes black with a blinking cursor in the top left and
the computer hangs. If I install the driver from safe mode, then the driver
installs ok, but on rebooting back to normal mode, the computer hangs with a
black screen.

Drivers up to and including 78.05 work just great.

For those who are interested, this is the relevant setup.

Windows XP Professional.
Tyan S2466N-4M mainboard.
AMD 762 northbridge, AMD 768 southbridge
Dual Athlon-MP 2600+ CPUs
2GB ECC registered RAM
BFG GF6800GT-OC 256MB AGP video card.

The 81.98 driver will load with a GF4 4200ti card but not with the 6800GT.

Will they ever fix it so I can get the "improved dual CPU and dual core
performance"?




This is probably one of two things, either it's not detecting your
monitor properly (i.e. the new "Direct Access" functionality), or your
refresh rate isn't being set properly.

First, make sure your monitor .inf file is installed. This provides the
OS with timing and refresh rate information. Do a clean uninstall of
the driver with a utility like Driver Cleaner and start over. If it
still does it, this might have something to do with the driver services
loaded at start. There's an entry for "nwiz" and "nvsvc32" on startup,
so try disabling those.

While your at it, also check the management console (right click My
Computer Manage) under Event Viewer and Application or System and see
if there's any specific events for the NVIDIA driver failing to start or
a display related error.