Thread: AGP Failure?
View Single Post
  #4  
Old January 16th 05, 07:18 AM
McGrandpa
external usenet poster
 
Posts: n/a
Default

"Martin" wrote in message

Tried this but no joy. Box Ok with TNT2 card but 4200, 5200, 6600 all
fail.
I'd thought about the RAM but discounted it as the box runs fine with
the TNT2 card.

Is it a motherboard swap next, then?


The TnT2 card is running at AGP 1X2X-3.3v
The other cards run at either 1.5v or .9v, or 2X4X8X
The 4200 should run at 3.3v

Can you get a picture with the 4200 in long enough to get into BIOS?
Since that's the card you had in the first place, it should be working.
Might be the power regulator for the AGP bus is going south.